New Suspension! Tein S-tech & KYB
#18
Actually they are a different type. Here's a link they want $170 per pair. I don't know how I only ended up paying $100 for the entire set, lucky auction I guess haha
http://cgi.ebay.com/ebaymotors/Toyot...Q5fAccessories
Nope not all! I'm running 265 tire in the rear.
http://cgi.ebay.com/ebaymotors/Toyot...Q5fAccessories
Nope not all! I'm running 265 tire in the rear.
#21
Well after driving it for a while it definitely feels better, but doesn't ride quite how I'd like it to. I get a little bit of popping in the front end, so I think control arms are next. I'd just replace the bushings, but I want new ball joints too.
I'm surprised to the front left tire rubs a bit when I turn left into an elevated area like my driveway. It doesn't look much lower than before either
I'm surprised to the front left tire rubs a bit when I turn left into an elevated area like my driveway. It doesn't look much lower than before either
#22
美少女戦士セーラームーン
iTrader: (24)
Interesting... I've been contemplating coilovers, but the more SC's I see on Supra springs makes me wanna change my mind
Funny what you say about your sway bar. Who ever worked on my SC before I bought it totally left the passenger side endlink disconnected from the LCA.
Funny what you say about your sway bar. Who ever worked on my SC before I bought it totally left the passenger side endlink disconnected from the LCA.
Actually they are a different type. Here's a link they want $170 per pair. I don't know how I only ended up paying $100 for the entire set, lucky auction I guess haha
http://cgi.ebay.com/ebaymotors/Toyot...Q5fAccessories
Nope not all! I'm running 265 tire in the rear.
http://cgi.ebay.com/ebaymotors/Toyot...Q5fAccessories
Nope not all! I'm running 265 tire in the rear.
#23
#24
Lexus Champion
iTrader: (15)
drop looks good man. nice and even front/back.
on a side note for the rest of you: unless you are doing some Seriously hard turning, the stock front sway bar on our car is utterly useless. On regular street driving there is barely any notticable difference in handling.
How do i know? because when i upgraded my suspension, my stock sway bar links (rusted/old) were also removed and i supposed to replace them but still haven't gotten around to it. And in the past i even hit some corners aggressivly, just to test this out. so, in essence, my sway bar is just sitting there doing nothing, yet CAR HANDLES THE SAME.
go figure..
on a side note for the rest of you: unless you are doing some Seriously hard turning, the stock front sway bar on our car is utterly useless. On regular street driving there is barely any notticable difference in handling.
How do i know? because when i upgraded my suspension, my stock sway bar links (rusted/old) were also removed and i supposed to replace them but still haven't gotten around to it. And in the past i even hit some corners aggressivly, just to test this out. so, in essence, my sway bar is just sitting there doing nothing, yet CAR HANDLES THE SAME.
go figure..
Last edited by MIGS; 07-23-10 at 04:34 PM.
#25
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Im digging the stance man. I have to agree with you on the stance decision also. I dont like them too low, but flush with the top of the tires, its perfect in my eyes too. It looks like you used a 40 series tire in the front, by the picture. It also reminds me of my 1992 pearl white sc.
#27
Yeah I like the stance, you can barely squeeze a finger between the fender/tire all around.
I do get a little bit of rubbing in the front if turning onto a driveway with an incline, but nothing too bad. I may do something about that later.
So regarding control arms, is the general consensus that going with the Supra arms from Carson Toyota the best price/decision? I'd do just bushings but I really want new ball joints too.
I do get a little bit of rubbing in the front if turning onto a driveway with an incline, but nothing too bad. I may do something about that later.
So regarding control arms, is the general consensus that going with the Supra arms from Carson Toyota the best price/decision? I'd do just bushings but I really want new ball joints too.