Found Energy Bushings for arms
07-05-02, 07:02 PM
#1
Pole Position
Thread Starter
Join Date: Feb 2002
Location: So Cal (of
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Found Energy Bushings for arms
i thought that would get your attention, i talked to energy suspension, they told me they dont make any bushings for the lower control arms BUT!, if i gave them the demesions of our stock bushings they might be able to cross refrence there parts to find one that will work.
also i told them about the problems with them and they seemed interested in R&D som eif they dont have them.
LEXUS shows a listing for the 95+ lower control arm bushings, and i beleive show a part number, but the part is not available.
what i need from you people are
(1) demension on the bushing OR a used control arm for me to MIC the mesuments (prefered)
(2)LINKS of all the problems we are having so i can email them the link incase they cant cross refrence the part demesions and need to manufacture the bushing
(3) the number for the company in australia that carries the bushings so i can simply order them. (this method would be best)
i posted here because nobody pays attention to SUSPENSION forum.
thanx if interested post.
-Xavier-
also i told them about the problems with them and they seemed interested in R&D som eif they dont have them.
LEXUS shows a listing for the 95+ lower control arm bushings, and i beleive show a part number, but the part is not available.
what i need from you people are
(1) demension on the bushing OR a used control arm for me to MIC the mesuments (prefered)
(2)LINKS of all the problems we are having so i can email them the link incase they cant cross refrence the part demesions and need to manufacture the bushing
(3) the number for the company in australia that carries the bushings so i can simply order them. (this method would be best)
i posted here because nobody pays attention to SUSPENSION forum.
thanx if interested post.
-Xavier-
07-06-02, 06:14 AM
#4
Pole Position
Join Date: Mar 2001
Location: Australia
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Err.... you want something like this...
http://www.lexus.australia.as/marketplace.htm
The bushings are listed there... I know that a shipment of these has made its way to the UK through LSOC club members and ALSC. They are pretty cheap depending on delivery cost as remember they are in Australian dollars. US$85 for front lower control arm bushes and US$60 for the rears. There are also other bushes availiable from there as well.
Toan.
http://www.lexus.australia.as/marketplace.htm
The bushings are listed there... I know that a shipment of these has made its way to the UK through LSOC club members and ALSC. They are pretty cheap depending on delivery cost as remember they are in Australian dollars. US$85 for front lower control arm bushes and US$60 for the rears. There are also other bushes availiable from there as well.
Toan.
07-07-02, 10:57 AM
#5
Pole Position
Thread Starter
Join Date: Feb 2002
Location: So Cal (of
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
hey toan
I email them in australia about the bushings, i havent gotten a responce yet, i need them BAD, my front lower are shot, and with the new 18's the car is all over the freeway.
07-07-02, 08:46 PM
#6
Driver School Candidate
Join Date: Jul 2002
Location: NSW
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Front Lower Bushes
I had my front lower bushes replaced last week by Whiteline Suspensions at Minto in Sydney's south-west. They stock the bushes (4 per side) and are happy to sell the bushes to anyone wanting to purchase then. A full set cost me about $160 while labour and a front & rear wheel alignment was a further $220 making the full job $380. Whiteline can be contacted on 612 9603 0111 if anyone is interested.
Regards Richard
Regards Richard
Trending Topics
07-09-02, 06:03 PM
#9
Pole Position
Thread Starter
Join Date: Feb 2002
Location: So Cal (of
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
ordered them
hey thanx richard, i ordered them from www.WHITELINE.com.au part number are spf1403k and spf 1404k, i talked to jackie, very nice, i hope there the right ones, because there gonna take about 10-14 days to get here.
the cost was like $190 shipped or something like that, not to sure, i just NEED THEM, ill keep you posted, when i get them here i might run up to energy and show them, so we can have someone local to get them from and save $40 in shipping.
-Xavier-
the cost was like $190 shipped or something like that, not to sure, i just NEED THEM, ill keep you posted, when i get them here i might run up to energy and show them, so we can have someone local to get them from and save $40 in shipping.
-Xavier-
Thread
Thread Starter
Forum
Replies
Last Post