Brake lights wont work....need help
#1
Thread Starter
Pole Position
iTrader: (1)
Joined: Dec 2008
Posts: 274
Likes: 0
From: Ontario, Canada
Brake lights wont work....need help
After spending a good amount of time trying to search here if anyone had the same problem. i ended up finding nothing. basically my brake lights dont work. everything else works though. if i turn on my lights my tail lights everything works fine(including the dual filament bulbs for my brake lights). however when i step on the brake the 2nd filament doesn't light up. i have checked the bulbs and they all work fine. also checked fuses in engine bay. havent checked fuses in the drivers side kick panel though. any suggestions on what the problem might be?
Trending Topics
#8
Thread Starter
Pole Position
iTrader: (1)
Joined: Dec 2008
Posts: 274
Likes: 0
From: Ontario, Canada
i have a parts with a working brake switch and i swapped it out already but still doesnt work..... anymore suggestion guys? its getting really bad for me here since people downtown like to ride my *** when im driving and i had a few close calls when they cant see that im already braking.
#11
Thread Starter
Pole Position
iTrader: (1)
Joined: Dec 2008
Posts: 274
Likes: 0
From: Ontario, Canada
i already checked the fuses in the engine bay. call me dumb but ive been trying to find the one on the driver side foot well. where exactly is it located or is there something i need to do to take out the whole fuse box?
#12
move the drivers seat back and get your whole head and body in the floor footwell. look towrds the inside of the drivers front fender and you should see a black rectangular box, remove the cover and look on the inside of it for reference to the stop light fuse
#13
Yeaup, just stick your head close to the pedals and look left its a little box. a light will help a lot too.