empera

iTrader: (13)

i'm having a tough time figuring out where all the wires on the IJ1 body plug goes. What i'm trying to figure out is the 3 black with orange strip wires. I have 2 black and oranges coming from harness but 3 from the body plug. So it would be nice to have a pinout or if you can help me figure this out i'd appreciate it.


Thanks

nnivlemm

same question, i have a jzx90 1jz going into a 92 sc300, and the harness needs to be modified. pinouts for the jzx90 engine harness, and the sc300 body plug would be appreciated

Superjatt

iTrader: (1)

bump i need this someones gotta have it.

stockhatch

iTrader: (12)

IJ1 pins 3 and 7 feed the ignition and injectors on the SC300. Pin 3 feeds injectors 1,3 and the ignition. Pin 3 feeds the other 4 injectors. There is also a B-O from IJ1 pin 2 that feeds the ECU switched hot.

On the GTE engines, (at least the 2JZ-GTE) one B-O feeds the injectors(all 6) and the other feeds the ignition circuits(Coils, and igniter).

Again, this is true for the 2JZ-GTE, but I have a feeling the 1JZ is similar. Sorry I cant be more specific. I have no diagrams for 1jz engines, sadly.

Superjatt

iTrader: (1)

Hmm. I looked around and what im looking for (i hope) is the dash harness pinout for ik2.
It has the same wire in the 2jzgte
and i think in the stock 2jzge.

mysexylex

i have the factory wiring diagrams if that will help. i dont understand exactly what your looking for pm me and let me no