RaceNaked

A local guy is selling a fmic 31x12x3 3in outlets. Will this fit my 96 sc300 if so what will all need to be done? Also this does not come with piping so where can i find a kit for the piping or do i have them made? All help is appreciated. thanks

SChema

iTrader: (2)

Not sure if the intercooler is going to drop right in, don't have any measurements on hand.

Piping wise, you're probably not likely going to find a kit. Your best bet is to build one out of mandrel bends or pie cuts.

turbodremz

iTrader: (18)

Thats the same size FMIC I am using with 3'' CX Racing i/c pipe kit from ebay. Fits just fine, but takes a bit of puzzle making to get the pipes to work without cutting anything on the car, but it can be done.

RaceNaked

So u just oredered a full piping kit and it hooked up just fine? What did u type in on ebay just sc300 fmic piping kit? Thank u guys for the help. Also did u keep ur bumper support and everything with that fmic?

turbodremz

iTrader: (18)

I will send the link via PM for the kit I used. And yes the bumper support is still in place. Only thing that didnt fit was the stock coolant over flow tank, so I just fabbed my own out of a spare piece of the i/c pipe.

good2go

iTrader: (6)

Do some searching, there's like a dozens of threads on this topic. I'll give you just one:

https://www.clublexus.com/forums/per...-have-any.html

RaceNaked

thanks for all the help and the pm!