When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I did the rears the same way. I just used a toothpick to pick out the excess in the small spaces. It was so easy. I'm definitely going to be experimenting with this on some other pieces. I would like to try the chrome around the doors and b pillars and rear windows. If I don't like it just peels up.
The outside pillars... I'm not sure the brand.. some of the guys on here might know.. but they make a spray black just for those pillars and it works REALLY good.
Li LS4 - did you take the emblems off or just leave them on the car as well?
Originally Posted by IXI187IXI
^ you just leave them on the car. once the plastidip dries, it peels right off and leaves no marks.
yup left them on and just pealed it off the paint. i used a tooth pick to get the inside part off. Although for the front emblem i did it a little differently and it came out WAY better.
i had to take the emblem off of my old bumper and put it onto my 97+ bumper. So what i did is take the emblem off the bumper, scape the glue off, put it back on bumper without any glue on it. i then sprayed it just like i did with the rear, pealed the outside off, and then lifted the emplem off the bumper and the extra stuff in the center of the L stayed on the bumper. It came out a lot nice this way. but it works fine without taking the emblem off