What did you do to your SC today?
#2642
Pole Position
iTrader: (1)
Join Date: Jul 2012
Location: California
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
A series of sanding from lower grit sand paper to higher grit then wet sand to get all those fine scratches away. Buff and clear coat! And yeah I did it while still being on my car, I just used a good amount of painters tape in case if I did lose control of the drill so I won't damage my paint.
#2644
Lexus Test Driver
Join Date: Mar 2006
Location: Lake Ray Hubbard
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Yesterday I changed both ignition coils - not a difficult process once you know what you are looking for and get those godawful screws out that like to strip(vice grips 8, crappy screws 0), and replaced the plugs, wires, cap & rotor on the driver's side. Still need to tackle the passenger side this evening, but at least now I have a running car that idles smoothly and can accelerate out of its own way. BTW all of the parts were ORIGINAL from 91/92, except the plugs(which were not even tightened correctly as they were barely finger tight). Up this weekend or next is the starter, all the fluids and replacing the passenger headlight(which I already have, but need to put on). Also working on a pair of clear led sidemarkers that may or may not be finished this weekend as well.
#2646
Lexus Test Driver
Join Date: Jun 2005
Location: South Bay
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
Yesterday I changed both ignition coils - not a difficult process once you know what you are looking for and get those godawful screws out that like to strip(vice grips 8, crappy screws 0), and replaced the plugs, wires, cap & rotor on the driver's side. Still need to tackle the passenger side this evening, but at least now I have a running car that idles smoothly and can accelerate out of its own way. BTW all of the parts were ORIGINAL from 91/92, except the plugs(which were not even tightened correctly as they were barely finger tight). Up this weekend or next is the starter, all the fluids and replacing the passenger headlight(which I already have, but need to put on). Also working on a pair of clear led sidemarkers that may or may not be finished this weekend as well.
#2653
Lexus Test Driver
Join Date: Jun 2005
Location: South Bay
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts