When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
And then, I modified my intake by chopping off the silencer box and using the air same ports to make it all work with no ill effects
Super BFI BABY!!
2 Free mods in 1 daY Before and after Pics
Nice, been thinking of also doing that, what did you use to cover the holes along with the hoses?
Nice, been thinking of also doing that, what did you use to cover the holes along with the hoses?
I cut the 2 pieces of plastic out of the box, both air ports basically. Cut them out wide enough to fit close to perfect to the 2 holes, you'll have to use a dremel to cut and sand it to shape and then use superglue and a bonding agent by loctite, glue them all up and and covered it with cf vinyl to make it look purdy . I tried to pull it apart this thing isn't moving and like part of the pipe very strong!
Hope that helps, ill get more pics for you my friend
I cut the 2 pieces of plastic out of the box, both air ports basically. Cut them out wide enough to fit close to perfect to the 2 holes, you'll have to use a dremel to cut and sand it to shape and then use superglue and a bonding agent by loctite, glue them all up and and covered it with cf vinyl to make it look purdy . I tried to pull it apart this thing isn't moving and like part of the pipe very strong!
Hope that helps, ill get more pics for you my friend
Ahh i see, nice work looking to do something similar and try to make it look oem as much as possible
Changed out the old incandescent bulbs for LEDs from SuperBrightLEDs. Loving it! The dome/ map, doors and trunk. I'll maybe change the ones in the visors, too. I forgot those had lights in them... got reminded when the girl pulls it down to use the mirror...
IJZ can you elaborate? I think both my gauges need help.
You need to remove the needles that are not reading correctly and reapply. Sometimes this has to be done several times to set correctly. I believe it has something to do with the calibration of the cluster and resetting the needles.