When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed XenonDepot 4300K HID's for low beams and fogs. Polished headlights with Meguiar's M205 and PlastX and also blacked out the chrome window trim.
Installed XenonDepot 4300K HID's for low beams and fogs. Polished headlights with Meguiar's M205 and PlastX and also blacked out the chrome window trim.
I was $0.30 short of the $50 threshold for free s/h on an Amazon order, so I looked through my wish list to see what was worth adding... Ended up grabbing two sets of Deeza LE-L617 rear sway bar end links, which were recommended by a member here. I don't know if they're a Black Friday special or just heavily discounted randomly, but it's basically buy 1 get 3 free.
Edit: Looks like the stock dwindled fast! Should be lots of clunk-free SCs soon.
Installed XenonDepot 4300K HID's for low beams and fogs. Polished headlights with Meguiar's M205 and PlastX and also blacked out the chrome window trim.
Had all the tail lens bulbs changed out (Sylvannia long life bulbs) as well as front turn signals and fog lights. Swapped in a new battery. No more lamp out indicator when lights are on and when braking.
Managed to take two shots of the splitter the bodyshop made for me...
Now, I just need to find that rear aluminum undertray shield on eBay.
[QUOTE=ar3;9689104]Installed XenonDepot 4300K HID's for low beams and fogs. Polished headlights with Meguiar's M205 and PlastX and also blacked out the chrome window trim.
ar3 how was the install on the kit? is it a plug and play?
thinking of installing this kit,thanks jim
what is a CANbus and do i need it for my 93 sc400?
Installed XenonDepot 4300K HID's for low beams and fogs. Polished headlights with Meguiar's M205 and PlastX and also blacked out the chrome window trim.
ar3 how was the install on the kit? is it a plug and play?
thinking of installing this kit,thanks jim
what is a CANbus and do i need it for my 93 sc400?
It is mostly plug and play for the headlights, for the fogs I had to use a dremel to make an opening for the wires to feed through. Other than that it was pretty simple, there are guides on here and on Youtube as well. I got it without the CANBUS no need for it.
It is mostly plug and play for the headlights, for the fogs I had to use a dremel to make an opening for the wires to feed through. Other than that it was pretty simple, there are guides on here and on Youtube as well. I got it without the CANBUS no need for it.[/QUOTE]
thanks,i will order the kit with the phillips bulb for $150 after the 25% sale .thanks again
ps i am going to just do the low beams.