When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Only thing new with mine is that I lost a few rear axle bolts (that bolt to the differential) and I was thoroughly convinced my driveshaft had broken. One of the small u-shaped brackets had come loose and was hitting my exhaust system causing a wild "thud" sound with each revolution. Limped it home and found the culprit.
Only one problem: I can't find the damn bolts anywhere online! Any ideas on where I could purchase them?
Only thing new with mine is that I lost a few rear axle bolts (that bolt to the differential) and I was thoroughly convinced my driveshaft had broken. One of the small u-shaped brackets had come loose and was hitting my exhaust system causing a wild "thud" sound with each revolution. Limped it home and found the culprit.
Only one problem: I can't find the damn bolts anywhere online! Any ideas on where I could purchase them?
Email or call https://www.ssl-parts.com/ The site is run by a SC owner, so he can help you with all your SC needs.
Only thing new with mine is that I lost a few rear axle bolts (that bolt to the differential) and I was thoroughly convinced my driveshaft had broken. One of the small u-shaped brackets had come loose and was hitting my exhaust system causing a wild "thud" sound with each revolution. Limped it home and found the culprit.
Only one problem: I can't find the damn bolts anywhere online! Any ideas on where I could purchase them?
thanks man well worth it. Bolts u need are for center support or for differential flange take a pic of which one and send to my inbox and that way i can tell you whether i have or where or who may have.
Drove the SC4 (first time in over a month) up PCH. Wanted to stop by Neptune's Net for lunch but it was way too busy, so just enjoyed the cruise and headed back to the SGV area to eat. Total = 200+ miles for a plate of ravioli. Fun times...
Did some track day preparations yesterday before heading out to High Plains Raceway this Friday. Pulled all of my axle bolts at the diff (they were finger tight after I forgot to loctite them when I re-installed my diff after the kaaz install). I added loctite, re-torqued, and took her for a cruise. I also topped off fluids, checked various suspension mounting points, and cleaned her all up. It's not track ready without tire shine right? hehe
I don't know which member lost their 98 DWP SC300 recently, but I saw this at the junkyard. Looks like a decal from before 2008.
The interior was still in very good condition. I grabbed what I could, and another SC owner showed up about 5 minutes after me to take the rest of the interior.
08-06-18, 02:19 PM
