What did you do to your SC today?
06-01-20, 01:40 AM
#7861
[QUOTE=Duck05;10811637]That is sweet, what is your suspension set up and how’s the clearance on the 235’s?
06-01-20, 03:05 AM
#7862
Pole Position
[QUOTE=koolina13;10816188]The Tein Street Flex are discontinued but as I recall the front springs are 14kg and the rears are 8kg, Nothing weird on the camber, no spacers or fender mods, and no need to relocate the driver side harness as the stops prevent rub on the wheel well, As shared before, the front is "12" with rear "8" turns. BTW, the coil over adjustments should be tighten all the way down and back off from 16 (so 4 clicks back to get to 12).
06-01-20, 07:33 AM
#7863
I'll be putting the bride seat back in later today as well.
06-03-20, 03:56 PM
#7866
Driver School Candidate
06-03-20, 10:06 PM
#7867
Pole Position
06-05-20, 01:58 AM
#7869
[QUOTE=Duck05;10816197]
Looks extra clean, I’ve got the same set up “12” front & “8” rear and adjusted them the same way. I don’t think I have any rubbing issues in the front but may install stops just in case. Don’t want any issues with the driver side harness. I’m familiar with that rerouting process and want to stay away from that if possible.The wrap on your chrome window trim brings everything together, I may have to take a page from you on that.
The Tein Street Flex are discontinued but as I recall the front springs are 14kg and the rears are 8kg, Nothing weird on the camber, no spacers or fender mods, and no need to relocate the driver side harness as the stops prevent rub on the wheel well, As shared before, the front is "12" with rear "8" turns. BTW, the coil over adjustments should be tighten all the way down and back off from 16 (so 4 clicks back to get to 12).
The following users liked this post:
RudysSC (06-10-20)
The following users liked this post:
RudysSC (06-15-20)
06-28-20, 08:35 AM
#7875
Pole Position
Wow..... What drove you to take this all apart and how long will it take to “......put it all back together again” ?