Sc600 runs w/ video!
11-30-10 | 08:01 PM
#1
Thread Starter
Pole Position
Joined: Jul 2008
Posts: 285
Likes: 0
From: PA
Sc600 runs w/ video!
I got the computer retuned today, so the car idles and does burnouts.
maybe i will have it road worthy by PRP drag day on the 19th
maybe i will have it road worthy by PRP drag day on the 19th
Last edited by millertime; 11-30-10 at 08:30 PM.
11-30-10 | 08:10 PM
#6
Thread Starter
Pole Position
Joined: Jul 2008
Posts: 285
Likes: 0
From: PA
11-30-10 | 08:15 PM
#7
Trending Topics
11-30-10 | 08:29 PM
#9
Thread Starter
Pole Position
Joined: Jul 2008
Posts: 285
Likes: 0
From: PA
11-30-10 | 08:42 PM
#14
Thread Starter
Pole Position
Joined: Jul 2008
Posts: 285
Likes: 0
From: PA
dual pass seracco style rad from speedway
ctsv oil pan cut rear crossmember out for right now but if your using a t56 the one that dan at dgr should work for u. it was to high to clear the 4l80e bell housing
ctsv oil pan cut rear crossmember out for right now but if your using a t56 the one that dan at dgr should work for u. it was to high to clear the 4l80e bell housing
11-30-10 | 08:45 PM
#15
Oh ok, and I actually talked to Dan today and ordered my mounts, but Im going to mod the crossmember myself. Dan said it shouldnt need much.
Huge props, and glad Im not alone with the LS swap. As far as I know, you are the first SC with an LSX in the US that will actually move independently. I shall be following soon.
Huge props, and glad Im not alone with the LS swap. As far as I know, you are the first SC with an LSX in the US that will actually move independently. I shall be following soon.