baodalazi

I just got the clutch slave cylinder replaced and clutch fluid flushed. worked for lik a day or two then slowly starting to get stuck again when i let go of the clutch pedal after leaving it in first gear at a stop light. i would have to take my foot and pull it back out.
If it happens and i dont pull it back out it would inch forwards by itself and when i step on brakes would slowly increase (I dunno how to say it but it will continually get worse then die out unless i pull pedal back out)

any help would be appreciated

MrBrock

well if you've already replaced the slave, master cylinder is probably the problem

kikcaffine

iTrader: (3)

My 240 used to do this same thing, replace the clutch master and you will be fine.

6SOARER

iTrader: (20)

Try bleeding the system first. After a few days getting my car back from the shop from them replacing the clutch, the same thing happened. I brought it back and all they did was bled it and never had any problems yet.

baodalazi

kk thanks for all the replies