broda805

iTrader: (6)

I've been searching a couple days now on how to re wire the aem ems for the gte into my sc with the stock ge I hear you have to swap a few wires or so but all the threads I've found so far are left open ended without a definate answer but it has been done.

Any one know how to or a link to a thread on how to do it, it would be greatly appreciated.

the reason being is that I can get a used tt ems alot cheaper n more common then the na version, don't have the funds for a new v2 made for the na at 1800$ getting a used tt ems for around 850 and spending some hours rewiring n saving some money it's what I'm going for

good2go

iTrader: (6)

Have you looked in the AEM forum?

scviolence

iTrader: (17)

dude if u figure this out lemme know. i been searching for the same thing and its just like you said everything is left open ended no one says ooh yeah it worked or hey ya need to do this or that...grrr

broda805

iTrader: (6)

i THINK if we can find a ecu pinout of a GTE and GE and switch around whats different and add the map sensor...... it should work... but i'll keep on searching in the meantime

99SC42

iTrader: (44)

It's easy i will send you the like tomorrow.
You just use the maf wire to rewire you ait sensor and map sensor.I can't remember off top off my head.
I am not sure about V2 but if you are talking about V1 i can help you with that.

lfrers

iTrader: (9)

I know your asking about the V1 but just for info I was told when I bought my V2 that to switch between GE & GTE it's just a jumper inside the unit.

Matador

Wouldnt a jumper harness work for this?

99SC42

iTrader: (44)

It's a simple task no jumper harness is needed the TT and GE as long as it's not 98 they both use the same still ECU connectors.

broda805

iTrader: (6)

yeah v1 obd1 yeah if you would when you got time shoot me a link or pm me

lexforlife

iTrader: (7)

dont forget the repinning for a/c request as well

Biggu

iTrader: (12)

it will work my buddy has a aem v2 on his GE that was made for a GTE

99SC42

iTrader: (44)

Here you go sir USE the one that say 30-1101 that's what you need.

nivek5sfe

http://www.supraforums.com/forum/sho...9-TT-AEM-on-NA

that thread could help you out also

broda805

iTrader: (6)

99SC42

iTrader: (44)

kOOL let us know how it goes... i like wiring an sC or Supra to AEM EMS since and if you run into issues it will help you diagnose the problem atleast it help me a couple times.