Help with 1JZ swap anyone?
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: MO
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Help with 1JZ swap anyone?
Hey everyone, been a while since i posted up here.........been real busy with school and work and now im making some time for the car. If anyone remembers my old threads i had a 2jz-GTE with a T67 and R-154. something went wrong , most likely wrist pin, metal shavings in the oil, and unfortunately screwed my turbo too......but hey life goes on and gotta figure out something.
So here is where im at now....... Instead of rebuilding the 2J i settled for a 1J got a t-61 and slapped on my r-154. I just dropped in the setup into the car last night and had a major issue. The driveshaft is connected fine to the tranny so as far as engine being far enough back it is.
The problem im having is the engine is freakin tilted! the engine mount on the passenger side is in its slot but its basically lifting the engine up tilting it towards the driver side! My fear is that i may be using the wrong Bracket/Mount set up.
My brackets and mounts are both from my 2JZ......can anyone chime in and give some advice
So here is where im at now....... Instead of rebuilding the 2J i settled for a 1J got a t-61 and slapped on my r-154. I just dropped in the setup into the car last night and had a major issue. The driveshaft is connected fine to the tranny so as far as engine being far enough back it is.
The problem im having is the engine is freakin tilted! the engine mount on the passenger side is in its slot but its basically lifting the engine up tilting it towards the driver side! My fear is that i may be using the wrong Bracket/Mount set up.
My brackets and mounts are both from my 2JZ......can anyone chime in and give some advice
#5
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: MO
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
But yes they are TT Mk4 mounts.......... im just stumped
I dont really have access to take pictures for a couple days, but does anyone have pics of what the correct mounts and brackets are supposed to look like?? It would be really helpful and much much appreciated!
#7
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: MO
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Hope "OneJay" doesnt mind me using this picture for reference. I have the brackets in the picture but i dont have these mounts. I have the mounts on the far right of the picture............... you think that is my issue? because come to think of it the engine does look like its sitting pretty high LoL
Trending Topics
#9
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: MO
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
So i made a trip out to the car today and figured out the problem...........the most stupid thing and i cant believe i didnt notice it. There are two different brackets on the motor!! exhaust side has 1jz bracket, intake side has 2jz bracket. And both sides have the bigger sized 2jz mounts.
im not positive, it could be many things. sounded something like a wrist pin, really bad ticking noise and it wasnt the lifters or springs cause i opened up cam covers and ran the car for a couple seconds to see exactly where the sound was coming from.......sounded like cylinder 5 or 6. And the clutch is stock....... and i absolutely babied the car when i first got it started basically treated it as if i was breaking it, didnt bog down the car or launch it, it never saw anything past 3500 rpm and i never let it hit boost of course.
im not positive, it could be many things. sounded something like a wrist pin, really bad ticking noise and it wasnt the lifters or springs cause i opened up cam covers and ran the car for a couple seconds to see exactly where the sound was coming from.......sounded like cylinder 5 or 6. And the clutch is stock....... and i absolutely babied the car when i first got it started basically treated it as if i was breaking it, didnt bog down the car or launch it, it never saw anything past 3500 rpm and i never let it hit boost of course.
#13
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: MO
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Next set of problems..... my heat and a/c dont work......... the actual climate control screen works the buttons work but the fan isnt blowing at all. Im gonna take a look at the fuse first of course for the blower motor, but if not looks like i need to change the blower motor out.
And a weird issue im having is the throttle on my 1J is sticking for some reason. Its not the throttle cable because the cable isnt hooked up yet but the actual throttle itself. Im hoping its just some gunk or something that throttle body cleaner will fix.
Thread
Thread Starter
Forum
Replies
Last Post