Ielwa

Hi, so we got the 1jz back, we got the new plugs in ( NGK bkr7eix )we got some problems the engine wont fire at all the cylinders so, we though it might be the coils,

So our question is, anyone got a good tips on some good coils we can buy new ? And can stand good for them,

All help is appriciated

Mr.1.5

My car would not fire on all 6 when my resistors were bad for the injectors.

Ielwa

Will check tomorrow Thanks,

Still any good tips for coils ? Will get new ones anyhow

Luv2xl

iTrader: (5)

supersparks

Ielwa

Hmm ? Thats the name of the coils ? (supersparks)

Ielwa

Nvm, found em, you got any experience with these ? Or anyone ?

93MSB

iTrader: (8)

i have a set, they work just fine. They are also a little cheaper than stock coils.

Ielwa

Aight Thanks, guess these will be on the next orderlist, less anyone else got anything to say,

Ielwa

Damnit, the car won't start, the starter goes around, and the car starts for about two rotations and just cuts off, ;/

Danny

FutureSC

iTrader: (1)

look at the coils to see if the stems are cracked at all. If so, tape them up with some electrical tape and see how it performs if at all

Ielwa

Yep that will be tomorrows work they seem to be cracking up easy due high temp, but guess this is a known problem with these engines,

Danny.

Ielwa

It starts! Finally it was a bad connection between the ignition controllbox and the rest of the engine,

The engine still cuts at high rpms even with new sparks and injectors, ;/ so next is to change the fuelpump,

Anyone know how high the fuel psi should be around with 650cc's and original twinturbos, ? Thanks

Danny

Ielwa

The pump is in and doing good, need to adjust the pressure some more tomorrow.