SC300/SC400 Key Fob Programming
04-05-11, 09:48 PM
#2
Driver School Candidate
Join Date: Sep 2010
Location: Washington
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I think anything under $40 for getting the key cut would be "fair"
To program the key you may need to take it to a dealer or find a factory repair manual with the instructions on key programming. You'll have to lock and unlock the doors a few times then open and close the door then stick the key in the ignition, take it back out again then lock and unlock the doors a few more times, key back in the ignition and turn the key to "on".
That's sort of how the dance goes for most of the 2000-2005 Lexus vehicles. Not sure how it works on a 94.
To program the key you may need to take it to a dealer or find a factory repair manual with the instructions on key programming. You'll have to lock and unlock the doors a few times then open and close the door then stick the key in the ignition, take it back out again then lock and unlock the doors a few more times, key back in the ignition and turn the key to "on".
That's sort of how the dance goes for most of the 2000-2005 Lexus vehicles. Not sure how it works on a 94.
Thread
Thread Starter
Forum
Replies
Last Post
GrrrRx330
RX - 2nd Gen (2004-2009)
5
04-01-11 02:29 PM
350, 92, blank, fob, instruction, instructions, key, keyfob, keys, lexus, program, programing, programming, rx, sc300, sc400
