V8 Supercharger...!!!
09-10-02, 12:45 PM
#1
Lexus Champion
Thread Starter
V8 Supercharger...!!!
http://www.toyotaparts4u.com/4.7_V8_supercharger.htm
Check out the link. Although this is for the trucks it looks like it MAY fit the cars! I have a 99 LS400 so I will post there as I find out new information. I need to know max height from the head flange to case top. Also, I need to confirm that the bolt pattern on the 4.7 is the same as 4.0 and 4.3 engines. Any imput is appreciated.
Check out the link. Although this is for the trucks it looks like it MAY fit the cars! I have a 99 LS400 so I will post there as I find out new information. I need to know max height from the head flange to case top. Also, I need to confirm that the bolt pattern on the 4.7 is the same as 4.0 and 4.3 engines. Any imput is appreciated.
09-10-02, 03:28 PM
#2
Lead Lap
Join Date: Jun 2001
Location: International
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
I emailed them about the blower for the Tundra (4.7ltr V8), they sent me back a link to the website but few details;
http://www.toyotaparts4u.com/4.7_V8_supercharger.htm
If it fits the 4.0ltr V8 block and fits under the bonnet it has to be a serious consideration for SC400 owners, 50% increase in BHP & Torque for $4k
http://www.toyotaparts4u.com/4.7_V8_supercharger.htm
If it fits the 4.0ltr V8 block and fits under the bonnet it has to be a serious consideration for SC400 owners, 50% increase in BHP & Torque for $4k
Last edited by London Bill; 09-10-02 at 03:29 PM.
09-10-02, 04:20 PM
#3
Chicago Lexus Club Moderator
Originally posted by London Bill
I emailed them about the blower for the Tundra (4.7ltr V8), they sent me back a link to the website but few details;
http://www.toyotaparts4u.com/4.7_V8_supercharger.htm
If it fits the 4.0ltr V8 block and fits under the bonnet it has to be a serious consideration for SC400 owners, 50% increase in BHP & Torque for $4k
I emailed them about the blower for the Tundra (4.7ltr V8), they sent me back a link to the website but few details;
http://www.toyotaparts4u.com/4.7_V8_supercharger.htm
If it fits the 4.0ltr V8 block and fits under the bonnet it has to be a serious consideration for SC400 owners, 50% increase in BHP & Torque for $4k
09-10-02, 04:35 PM
#4
Lexus Champion
Thread Starter
Looks like this was discussed a while back in the GS forum. Consensus is... too tall for the stock hood. An aftermarket hood with a bulge would be required... oh, well.
09-10-02, 10:57 PM
#5
Driver
Join Date: May 2001
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
why not just wait a few months (i wouldn't hold my brea...) for the aussie supercharger kit? the exchange is better than japan also...
http://www.forcedairtech.com.au/
just better hope they fit us-spec cars...
trd isn't going to develop anything for our cars (i wouldn't waste your time looking to them)...just not economically feasible.
if they did, would they have to market it as a lrd product in the us?:eek:
http://www.forcedairtech.com.au/
just better hope they fit us-spec cars...
trd isn't going to develop anything for our cars (i wouldn't waste your time looking to them)...just not economically feasible.
if they did, would they have to market it as a lrd product in the us?:eek:
Thread
Thread Starter
Forum
Replies
Last Post
