Stocks Sub swap?
07-03-11, 06:43 AM
#31
Lead Lap
Join Date: Feb 2011
Location: texas
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
I've got a Pioneer 10" sub in the stock location. Gives me just enough thump I need. Had to put a piece of wood in the stock sub location to raise the aftermarket sub enough to be flush. You can't see the wood because it is covered in the black speaker trim which gives it all a complete stock look. No complaints whatsoever on the change.
07-03-11, 09:16 AM
#32
wattage means nothing until you say the brand of amp you are running. Now-a-days there are cheap @$$ amp that are way over rated inorder to sound and look appealing to consumers, but when it comes down to it, they aren't worth a $h!t 
So when you go amp shopping, keep this in mind. Decent amps run about $1-1w at 4ohms.
So when you go amp shopping, keep this in mind. Decent amps run about $1-1w at 4ohms.
Last edited by socal72; 07-03-11 at 09:20 AM.
07-03-11, 09:31 AM
#33
socal72
Sorry about that, I should of told you what I had. Right now I have a Alpine PDX-F4 and Alpine PDX-M12 I also have a Rockford Fosgate Power T400-4 and Rocford Fosgate T1000 "2009 Edition" along with Two sets of Alpine Type-R's 10's/12's and Type-R 6.50's for the front and rear. Oh yeah and for you "old school peeps" I have a Audiobahn A2200HC amp. So hows that for "Brands and Wattage"?
Sorry about that, I should of told you what I had. Right now I have a Alpine PDX-F4 and Alpine PDX-M12 I also have a Rockford Fosgate Power T400-4 and Rocford Fosgate T1000 "2009 Edition" along with Two sets of Alpine Type-R's 10's/12's and Type-R 6.50's for the front and rear. Oh yeah and for you "old school peeps" I have a Audiobahn A2200HC amp. So hows that for "Brands and Wattage"?
07-03-11, 11:11 AM
#34
https://www.clublexus.com/forums/sc-...reo-build.html
07-03-11, 03:49 PM
#35
Not a lot of rattle but it does flex a little. The lid itself hasn't been dynamatted though, just the fender area, inside the tail light housing, behind the license plate and the whole doors. There's little to no rattle inside from the subs when cranked up and is crystal clear even at 3/4 volume.
https://www.clublexus.com/forums/sc-...reo-build.html
https://www.clublexus.com/forums/sc-...reo-build.html
07-03-11, 08:59 PM
#36
I thought the thread was about putting an aftermarket sub in the stock location. Whether I retained the OEM grill or not was optional. Its all good though....I'm ok with the sub being exposed the way it is. Its still a somewhat dark color so it blends in well with the black felt wrap for me.
07-03-11, 10:19 PM
#37
Lead Lap
Join Date: Feb 2011
Location: texas
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Thanks bleedspeed I thought the thread was about putting an aftermarket sub in the stock location. Whether I retained the OEM grill or not was optional. Its all good though....I'm ok with the sub being exposed the way it is. Its still a somewhat dark color so it blends in well with the black felt wrap for me.
I thought the thread was about putting an aftermarket sub in the stock location. Whether I retained the OEM grill or not was optional. Its all good though....I'm ok with the sub being exposed the way it is. Its still a somewhat dark color so it blends in well with the black felt wrap for me.
Thread
Thread Starter
Forum
Replies
Last Post
kayrohit12
Lexus Audio, Video, Security & Electronics
7
04-11-13 09:56 AM
