sc600 vs caged full race crx
08-13-11, 12:41 PM
#21
Pole Position
Thread Starter
Join Date: Jul 2008
Location: PA
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
All i actually know about that crx is that it came from a shop, came off of an enclosed trailer. Was N/A, totally empty except for a seat and a cage.
lexan windows, bolt on hood u know race car
its basically a stock LQ9 motor with 6.0 iron block aluminum heads ls6 intake.
1 3/4 long tube headers with turn downs
lexan windows, bolt on hood u know race car
its basically a stock LQ9 motor with 6.0 iron block aluminum heads ls6 intake.
1 3/4 long tube headers with turn downs
Last edited by millertime; 08-13-11 at 12:53 PM.
08-13-11, 01:08 PM
#22
Nope stock jdm b16 with an aftermarket chipped ecu of some sort and it had an lsd ys1 close ratio trans which is why it did what it did Lol
That sc has some mega potential as anything with an lsx swap has tons of aftermarket support! I am curious what the fuel mileage is with it in the sc300 as the ls motors are known for good fuel mileage on the highway.?
That sc has some mega potential as anything with an lsx swap has tons of aftermarket support! I am curious what the fuel mileage is with it in the sc300 as the ls motors are known for good fuel mileage on the highway.?
08-13-11, 06:03 PM
#28
im sure if he tubbed out his lexus to bare metal interior. he would run a good time too. honda's can only go fast if u strip out 100 pounds of interior lol
anyway. that LS2 has potential. if u put some heads on it and a monster cam, injectors. the whole 9 yards. im sure with a bit of work. u can squeeze out 400 to 500 ish horsepower out of it.
and then eat that honda for lunch.
anyway. that LS2 has potential. if u put some heads on it and a monster cam, injectors. the whole 9 yards. im sure with a bit of work. u can squeeze out 400 to 500 ish horsepower out of it.
and then eat that honda for lunch.
08-13-11, 08:49 PM
#30
Lead Lap
iTrader: (2)
Join Date: Jan 2006
Location: texas
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
i call bs. ive worked around and on hondas for a while now and have never seen a 1.6 break under 12s. the crx may be the lightest chassis but a stock b16 running 11.1 is not likely. my tuner built a stroked out b16 on vtec killer cams and pulled 11.40. your 11.1 is very unlikely unless it was the 1/8th mile