SC- 1st Gen (1992-2000)

cd player wiring

Thread Tools
 
Search this Thread
 
Old 08-18-11 | 09:58 PM
  #1  
baodalazi's Avatar
baodalazi
Thread Starter
Rookie
 
Joined: Oct 2009
Posts: 96
Likes: 0
From: Alabama
Default cd player wiring

i got the 1987 and up toyota wiring that matches with my 92 sc300, and i had a orange wire left on it and all the wires from the cd player are matched up.

any help would be appreciated because the cd player is not turning on.

it fits in the two plugs perfectly and the other two plugs that are not being used are for the cd changer
Old 08-18-11 | 10:23 PM
  #2  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

as far i knw, there hasnt been a working dash wire kit for the sc besides metra (i think)
but anyway orange should only be for illumination (99%) of the time but that shouldnt effect it turning on or off, check your fuse to make sure it didnt blow as you were putting the wires together, happens quite often, and make sure your cd player is in working condition
Old 08-18-11 | 11:24 PM
  #3  
baodalazi's Avatar
baodalazi
Thread Starter
Rookie
 
Joined: Oct 2009
Posts: 96
Likes: 0
From: Alabama
Default

would this one work?

http://www.amazon.com/Metra-Toyota-1...731410&sr=8-14

i bought this one

http://www.amazon.com/SCOSCHE-TA02B-...3731410&sr=8-2
Old 08-19-11 | 08:52 AM
  #4  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

you can give the metra one a shot, it should work
other people on the forum used 2 wires
Metra 70-8112
Metra 70-7116
that should get it going good
Old 08-19-11 | 08:53 AM
  #5  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

116 is to be able to use the stock amp (i think) so u should be able to make it by with just using the one from amazon but u wont have the working stock amp
Old 08-20-11 | 02:10 PM
  #6  
baodalazi's Avatar
baodalazi
Thread Starter
Rookie
 
Joined: Oct 2009
Posts: 96
Likes: 0
From: Alabama
Default wires

i have the 116 amp one already i just didnt wire it in i used the scosche and it matched everything up.

but still no power i know the sc300 stock radio needs the power button on the bezel to be hooked up and pressed to work.

i tried doing it, but no dice. do i need to splice into the power wire to power up the cd player?
Old 08-20-11 | 02:14 PM
  #7  
baodalazi's Avatar
baodalazi
Thread Starter
Rookie
 
Joined: Oct 2009
Posts: 96
Likes: 0
From: Alabama
Default

I also brought the cd player to the local audio shop and it bench tested perfect
Old 08-20-11 | 11:53 PM
  #8  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

u shouldnt need to splice any wires for it, did you check the fuse? and also idk if the scorshe one works cuz i havnt heard of anyone using it, but the metra should work,
if not ull do what most people had to do and hard wire it,i actually think hard wirirng it slightly a better fix that way you know how good the speaker wire is and its bttr than the stock wiring
Old 08-21-11 | 01:22 AM
  #9  
SC400-PHAE's Avatar
SC400-PHAE
Pole Position
iTrader: (2)
 
Joined: Sep 2009
Posts: 312
Likes: 0
From: NM
Default

i bought a wire kit that was suppose to work with the stock amp but no go so i just hardwired it wasnt too bad.... that was my first time installing too
Old 08-21-11 | 09:13 AM
  #10  
baodalazi's Avatar
baodalazi
Thread Starter
Rookie
 
Joined: Oct 2009
Posts: 96
Likes: 0
From: Alabama
Default

whats hardwiring? is it "raines" thread on running it to the rear trunk wires?
Old 08-21-11 | 10:44 AM
  #11  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

hardwiring is running everything directly from the head unit itself, headunit to the speaker using your own speaker wire, find a 12v and a ground and n accesory wire just run it all without the stock wiring, theres also a write up to run it from the stock wiring do a search for it
Old 08-21-11 | 10:57 AM
  #12  
blacksc4's Avatar
blacksc4
Lead Lap
iTrader: (1)
 
Joined: Aug 2010
Posts: 400
Likes: 1
From: ohio
Default

https://www.clublexus.com/forums/lex...b-working.html

u can do it that way, or the way i did it is run directly from the head unit and i havnt had any problems with it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tony320
Lexus Audio, Video, Security & Electronics
19
11-14-08 12:31 PM
93ls400WD
LS - 1st and 2nd Gen (1990-2000)
3
02-28-07 07:08 PM




All times are GMT -7. The time now is 11:54 PM.