1uz+ emu
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hey guys, just another newbie to the EMU scene
Ive managed to get it hooked up to 1uz (uzz31, 91) and feel pretty proud that car still runs haha, everything is working now with exception of IGN, it just refuse to run.
What i tried is IGT1 to CH1 IGT2 to CH2 and set the 4 cylinder option in emanage software with 2 inputs 2 outputs, car still didn’t start. I/J, RPM and Throttle position work fine. So I am wondering if anyone could shed some light on the IGN system in 1uz, what settings should the emange have. And should the jumper be set to 5v or 12v IGN? Any help would be appreciated.
Ive managed to get it hooked up to 1uz (uzz31, 91) and feel pretty proud that car still runs haha, everything is working now with exception of IGN, it just refuse to run.
What i tried is IGT1 to CH1 IGT2 to CH2 and set the 4 cylinder option in emanage software with 2 inputs 2 outputs, car still didn’t start. I/J, RPM and Throttle position work fine. So I am wondering if anyone could shed some light on the IGN system in 1uz, what settings should the emange have. And should the jumper be set to 5v or 12v IGN? Any help would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
SC400slide
Performance & Maintenance
29
12-17-12 05:39 PM
Lexgendboi
SC- 1st Gen (1992-2000)
6
07-30-02 09:44 PM