Aftermarket under engine cover
#1
Aftermarket under engine cover
There used to be an aftermarket under engine cover as an upgrade for the OEM one. I lost the link and seem to be unable to find the manufacturer again. .:uh I remember it being made by small company, Any help would be appreciated. Thanks
#4
Re:non oem cover
I believe that it comes for both the 300 and the 400. It replaces the plastic cover that goes from the bottom of the front bumper back to the front crossmember. The reason I want one is that it has a door to allow access to the oil filter and it isn't supposed to sag like the factory unit.
#6
some say it covers beneath the engine
before and after a tire on the free way took a bite of mine..... it was still together but i ripped it off in case it fell. fixed the sagg but interested what this piece you speak of looks like
before and after a tire on the free way took a bite of mine..... it was still together but i ripped it off in case it fell. fixed the sagg but interested what this piece you speak of looks like
Trending Topics
#8
this can be very easily made yourself and migth even be better then the oem's that seem to not hold up very well over time.
Mine is in pieces and barely hanging on and the car has never scraped and has been babied.
Mine is in pieces and barely hanging on and the car has never scraped and has been babied.
#9
I believe it's the same guy that sells the the kit for making a bfi.you can reach him at tbrenshaw@comcast.net.
#12
Finally I found the guy!
http://www.ebay.com/itm/S5-Splash-Sh...ht_2792wt_1348
Looks like he disappears whenever he sells this product. So, for future reference, his username in eBay is; trenshaw19. Quite pricey actually, $299.50. Although it comes with new mounting hardware, the air shroud and the engine undercover. I'll contact him when I have time to ask what's the difference with the OEM ones. And oh yeah, he's also the same guy that makes and sells the BFI!!!
http://www.ebay.com/itm/S5-Splash-Sh...ht_2792wt_1348
Looks like he disappears whenever he sells this product. So, for future reference, his username in eBay is; trenshaw19. Quite pricey actually, $299.50. Although it comes with new mounting hardware, the air shroud and the engine undercover. I'll contact him when I have time to ask what's the difference with the OEM ones. And oh yeah, he's also the same guy that makes and sells the BFI!!!