92 SC400 Can't open passenger door from inside!?!
#1
92 SC400 Can't open passenger door from inside!?!
When I try to open the passenger door using the inside handle the door does not open. I just got done fixing the clip on the outside door handle and now the inside handle doesn't work. During the repair the door would not open from either handle and at one point I pulled on the inside handle hard and worder what I could have broken inside. Good news is that I got the door opened and the outside handle fixed butI don't see anything obivious inside the door to explain the inside handle not working. Cables hooked corredtly. HELP!
Last edited by dogwisper; 11-05-11 at 12:46 PM. Reason: ommission and mispelling
#3
Handle is fine. Door panel removed and pull on cable and nothing. I was able to feel and see in there and found out I broke a plastic piece that hold the cable to the actuator. I guess I will have to go to the junkyard to try to find a new actuator. Thanks for your help.
#4
Does your inside door handle have a lot tension? I'm having the same problem but my driver side door. I notice the cable that's connected to the inside door handle broken but still intact. I'm trying to Figuir it out too. I wonder if we can just change the cable. Idk good luck
#5
If you buy a new actuator it'll come with a lot of stuff you don't need in this case. If if comes with the rod that goes from the actuator to the outside door handle, I'll pay you for it!! That would save me from having to buy a whole assembly just for the rod.
Trending Topics
#8
If you do have the rod from the outside handle to the actuator assembly it would be fantastic! It was missing when I got the car and it's the only thing keeping me from installing the replacement door panel. Yes, the door panel was gone too!
#10
Pole Position
iTrader: (7)
dogwisper...let me know if this you're looking for...
the connector to the lock actuator...
moojohn...that top metal "stick" w/ the broken half red clip is your metal rod...the only catch is that it's virtually riveted it on to the unit (and i'm sure for good reason since you don't want it to fall out) so not sure if it's something you can just "unclip" w/o rendering the piece useless.
you guys let me know what you want to do. dogwisper if your cable is just broken and need new cables then i can pull those off and send you the cables and send moojohn the rest of the actuator so he can open his door again...but if your issue is more than just "cable issue" then you'll probably need the entire unit and perhaps you can send your old one to moojohn and let him try and get the metal stick out and get it working for him.
the connector to the lock actuator...
moojohn...that top metal "stick" w/ the broken half red clip is your metal rod...the only catch is that it's virtually riveted it on to the unit (and i'm sure for good reason since you don't want it to fall out) so not sure if it's something you can just "unclip" w/o rendering the piece useless.
you guys let me know what you want to do. dogwisper if your cable is just broken and need new cables then i can pull those off and send you the cables and send moojohn the rest of the actuator so he can open his door again...but if your issue is more than just "cable issue" then you'll probably need the entire unit and perhaps you can send your old one to moojohn and let him try and get the metal stick out and get it working for him.
#11
Yes I actually just need the door handle cable and specifically that little plastic guide that attaches the cable to the actuator. If the cable can be easily attached to the actuator then all I need is the cable and that white plastic piece that attaches the door handle cable to the actuator.
#12
Pole Position
iTrader: (7)
help me remember...is it the cable w/ the blue plastic around it or the cable w/ the off white plastic around it?
one looks easy to pull off...the other looks to be a total PITA.
blue = door handle - ez
white = door lock/unlock - PITA
one looks easy to pull off...the other looks to be a total PITA.
blue = door handle - ez
white = door lock/unlock - PITA
Last edited by mktbully; 11-08-11 at 07:15 PM.
#13
The one with the off blue plastic around it. I just felt back there and it feels like there is a plastic guide that attaches it to the actuator that is broken. Does that look like what you have there. If you are up for it and that is what you see too I can just use the blue cable and the plastic guide off of the actuator..
#14
I was hoping the rod wasn't too bad. In this thread they showed a pic of the rod coming out:
Naturally I was hoping to pop in the rod without having to remove the actuator itself.
Naturally I was hoping to pop in the rod without having to remove the actuator itself.
#15
Pole Position
iTrader: (7)
I was hoping the rod wasn't too bad. In this thread they showed a pic of the rod coming out:
Naturally I was hoping to pop in the rod without having to remove the actuator itself.
Naturally I was hoping to pop in the rod without having to remove the actuator itself.
the riveted part on the arm has a bushing on it so every time you pull the door handle it rides on the bushing and pushes the arm down.
I'll get more pics tonight to give you more detail on it if you like.