SC- 1st Gen (1992-2000)

SC300/SC400 New Member Thread! Introduce yourself here!

Thread Tools
 
Search this Thread
 
Old 12-02-12 | 06:54 PM
  #3076  
FastCarsBG's Avatar
FastCarsBG
Rookie
 
Joined: Dec 2012
Posts: 50
Likes: 0
From: Morgan Hill, CA
Default New to the SC scene!

Hey everybody. Well I have finally joined the SC scene! I have been a car guy my whole life have had many cars over the years from turbo 1g DSM's to a couple of Supra s to some early muscle cars and even some early British cars. I am very excite to get started on this one! I have purchased a 92 SC300 with a 1jz swap that was started but not completed! (bought it for a song) and I am looking forward to the mods and shaking the car down. I have a 2j engine that will eventually end up in it I am sure. Anyway, glad to be here!
Old 12-02-12 | 08:50 PM
  #3077  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

Originally Posted by scoupewill
Will

1994 Lexus SC400

not sure exactly what i want to do with the car. just running thru it fixing all the know problems it has. Got the drivers side door panel working again by soldering the broken wire, also i am slowly replacing the center console that was missing, putting all the interior peices back where they belong. Things i am still fixing: passenger side window not working, fuel pump not shutting off when car is turnt off, when the brake light switch is plugged in the car stalls, temp and gas need not illuminated, starter bearing making noise, and thats all i can remember right now.
My starter bearing is noisy as well... Welcome to CL!
Old 12-03-12 | 04:23 AM
  #3078  
EckzLexus's Avatar
EckzLexus
Driver School Candidate
 
Joined: Dec 2011
Posts: 5
Likes: 0
From: AZ
Default Long time CL user, but few posts

hey guys, I am a long time member but post very rarely. Over the past 12 years I have owned 3 SC400s, 3 SC300s, and 5 LS400s.

I currently own 3.5 SCs ('94 SC400, '96 SC300 parts car, '94 SC400 setup for 1/2jzgte - no engine yet, and a few parts left of my '92 parts car).

Currently I am involved in many SC projects here in Phoenix.

I am building a 4.7L Tundra block/1uz/r154 for my black on tan '95 SC400 - building what Lexus should have! I have purchased the interior manual swap parts, pedals, clutch master cylinder, and aluminum driveshaft from DriftMotion.com, the r154 transmission adapter/clutch kit from Quantum-Auto.com, Tilton hydro TO bearing, and just got my tranny rebuilt with all Marlin Crawler and OEM internals. Looking for 400-500 RWHP on a Supra Turbo 5 speed after the engine build. I just replaced leather and the steering rack on this car and its currently sitting on Supra struts, lowering springs, and black staggered 18" wheels. This car is gonna be sick...

I am also searching for a viable 1jzgte longblock for my other black SC400. The car has the LS400 front brake upgrade, new rotors, and a stripped interior. Im thinking drift car...

My red SC300 is currently being stripped for parts. I hope to start selling various used parts after I meet the site requirements for posting them.
Attached Thumbnails SC300/SC400 New Member Thread! Introduce yourself here!-werkn.jpg  
Old 12-03-12 | 05:47 AM
  #3079  
kwb312's Avatar
kwb312
Driver School Candidate
 
Joined: Nov 2012
Posts: 4
Likes: 0
From: VA
Default 1999 sc300

Name is Kenny i just purchased an all black sc300 from a dealer in lynchburg , va. i have high hopes for this vehicle. just recently sold my supra to get this car. i dont know too much about lexus vehicles. heres a list of mods i would like to do.

1. Front lip
2. Coilovers
3.1 or 2JZGTE motor swap
4. in-dash nav unit
5.CF hood
6. Exhaust

If anyone has any suggestions on parts or even websites that would be greatly appreciated
Attached Thumbnails SC300/SC400 New Member Thread! Introduce yourself here!-lexus-006.jpg  
Old 12-03-12 | 03:18 PM
  #3080  
davidsc's Avatar
davidsc
Driver School Candidate
 
Joined: Dec 2012
Posts: 1
Likes: 0
From: tx
Default wats up yall

wats up yall im david im new to the sc world and im planning a kinda big project off the muscle i want to pull out the 2jz na and swap with the 2jz tt supra engine this will be my first engine swap i want the 6 speed tranny and all i seen a guy doing the automatic swap but ther aint nothin like shiftin gears i got a few questions if any one has done it with the 6 speed like does everything bolt ub exact and if not wat mods do i have to do besides the obvious like put in the clutch pedal cut holes for the lines and shifter i dont have my sc yet im getting it after the first of the year after the world is supposed to end but im tryin to get as much knowledge on this swap as i can so i kinda know wat to expect i eventually want to get about 800 or 900 rwhp out of it on pump gas im going big or going home but when i do the swap ill be ok with about 300 to 400 ive already found my motor and trans im lookin for my sc now i found a couple that i like im lookin for a black or white sc so if you know of any around dfw let me know and it needs to run because i have to drive it until i get all of my parts for the swap thanks yall lookin forward to yalls input
Old 12-03-12 | 03:52 PM
  #3081  
emoFTW's Avatar
emoFTW
Driver
iTrader: (1)
 
Joined: Dec 2012
Posts: 177
Likes: 1
From: OK
Default

Hey guys, My name is Lee and I'm from OK. Just picked up a 95 SC300 with 97+ conversion.
1JZ, R154, Single turbo.

Went from a 500hp LS1 to this car!

It's very dirty, please excuse it.
Attached Thumbnails SC300/SC400 New Member Thread! Introduce yourself here!-460065_833544264164_930358365_o.jpg  
Old 12-03-12 | 04:44 PM
  #3082  
rjonesmci's Avatar
rjonesmci
Driver School Candidate
 
Joined: Sep 2004
Posts: 1
Likes: 0
From: Wisconsin
Default Introduction

Hello, I have 2 1993 SC400s and 2 RX350s a 2007 and a 2008. Needless to say I like the Lexus cars.

I am thinking of selling one of a white SC400 that has 140k miles on it. It is in very good shape with no body problems and only a little wear and tear on the interior. Here are a couple of questions. The SC I want to sell is located in San Diego. Any suggestions as to a fair price to ask?

Also this SC runs about 3400 rpm at 70mph. Is this about right? I don't remember what my other one runs at and it is back in WI. It runs fine, and is very responsive but I'm questioning the extra fuel a couple of hundred rpm would use.

Thanks in advance for any suggestions.
Old 12-03-12 | 04:57 PM
  #3083  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

Originally Posted by rjonesmci
Hello, I have 2 1993 SC400s and 2 RX350s a 2007 and a 2008. Needless to say I like the Lexus cars.

I am thinking of selling one of a white SC400 that has 140k miles on it. It is in very good shape with no body problems and only a little wear and tear on the interior. Here are a couple of questions. The SC I want to sell is located in San Diego. Any suggestions as to a fair price to ask?

Also this SC runs about 3400 rpm at 70mph. Is this about right? I don't remember what my other one runs at and it is back in WI. It runs fine, and is very responsive but I'm questioning the extra fuel a couple of hundred rpm would use.

Thanks in advance for any suggestions.
I'd start high, then lower the price over time. Or what I did when I was selling a car was say the price is FIRM, so I didn't get any flakes test driving it. Your RPM's don't sound unusually high, but it might only show that because you have it in overdrive, which is better on gas, and uses lower gears. Take it out of overdrive and it will probably get down to 2900-3200 RPM's at 70 mph.

Welcome to CL! Post up some pictures of your 4 Lexus'!
Old 12-03-12 | 05:20 PM
  #3084  
chrisindub's Avatar
chrisindub
Pole Position
iTrader: (1)
 
Joined: Dec 2011
Posts: 304
Likes: 0
From: Pasadena, CA
Default

Originally Posted by SC400slide
I'd start high, then lower the price over time. Or what I did when I was selling a car was say the price is FIRM, so I didn't get any flakes test driving it. Your RPM's don't sound unusually high, but it might only show that because you have it in overdrive, which is better on gas, and uses lower gears. Take it out of overdrive and it will probably get down to 2900-3200 RPM's at 70 mph.

Welcome to CL! Post up some pictures of your 4 Lexus'!

^^^^^^^ I'm no mechanic, but I think that's incorrect. His SC is about 1000 rpm higher than normal for 70 mph in overdrive. When you are in overdrive the car should be around 2500-2700 at 70 mph. If you are out of overdrive the car will be in third gear at 70mph which would explain the high RPM around 3500.
Old 12-03-12 | 05:51 PM
  #3085  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

Originally Posted by chrisindub
^^^^^^^ I'm no mechanic, but I think that's incorrect. His SC is about 1000 rpm higher than normal for 70 mph in overdrive. When you are in overdrive the car should be around 2500-2700 at 70 mph. If you are out of overdrive the car will be in third gear at 70mph which would explain the high RPM around 3500.
I stand *sit* corrected. 3400 RPM's is too high. Even if you have the car in overdrive. 2700 RPM's in overdrive @ 70 MPH is were it is supposed to be.
chrisindub is correct.

Last edited by SC400slide; 12-03-12 at 05:59 PM. Reason: no my car doesn't...:)
Old 12-03-12 | 05:55 PM
  #3086  
sc3kes's Avatar
sc3kes
Driver School Candidate
 
Joined: Sep 2012
Posts: 4
Likes: 0
From: fl
Default

97 rsp, hoods popped in picture
Attached Thumbnails SC300/SC400 New Member Thread! Introduce yourself here!-2012-08-20-09.29.10.jpg  
Old 12-03-12 | 09:48 PM
  #3087  
dyl1996SC3's Avatar
dyl1996SC3
Driver School Candidate
 
Joined: Nov 2012
Posts: 12
Likes: 0
From: CA
Default Read my whole story please!

Hey guys! I'm new on here,
my basic story is that I'm a 16 year old guy, and I drive a 1996 Lexus sc300 with around 80k miles. it is all 100% stock and super clean. I like to call her my virgin shes pearl white with tan interior. She does have an automatic transmission which I plan to change to the 5 speed asap. I also want to do a NA-T setup eventually, because lets be real, 225hp isn't the best this engine can do some of the first mods i want to start with is suspension, wheels and heaven forbid that ugly stock 4 spoke steering wheel (I'm thinking about the is300 wheel or the newer 3 spoke sc wheel) If anybody wants to help me make any decisions on anything mods wise, maybe about something you like about your car that added, message me!
Old 12-03-12 | 09:54 PM
  #3088  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

SO MANY 16 YEAR OLDS!! lol Welcome to CL!
Old 12-04-12 | 10:49 PM
  #3089  
PoisonedSc's Avatar
PoisonedSc
Driver School Candidate
 
Joined: Nov 2012
Posts: 38
Likes: 0
From: Pa
Default

Originally Posted by Descal262
Hello my name is Dan. I am currently a technician in training, still on my first year. However, I do have about 3 years of "servicing" cars under my belt, mostly just in my garage in the back with jeeps. It may not be anything intense, but I still have a very broad general idea of cars. I would consider I am ahead of many people in my class as far as knowledge and experience. Other than that, I don't have much more to say. I'm hoping to become a Lexus technician, I don't care what anyone says about becoming a technician. It's what I love and what I want to do. I may be going into the T-Ten program, if not I already have places lined up who are ready to give me an internship as soon as I pass my first ASE test this January. Unfortunately I do not own a Lexus, I have no where near the money to own a Lexus haha. I drive a 1981 Jeep CJ-7 that gets terrible mpg. And that's basically all I have to say. I love Lexus, Audi as well as Jeeps.
my jeep gets better mpg then my sc300
Old 12-06-12 | 01:45 PM
  #3090  
saints's Avatar
saints
Driver School Candidate
iTrader: (1)
 
Joined: Nov 2012
Posts: 14
Likes: 0
From: tn
Default new member

Hello club members. My name is Marc Anthony. I'm a recent proud owner of a green 1992 sc 400 with a little over 200,000 miles living in Memphis, Tn. I bought it out of Houston Tx. I look to get some much needed info on the sc 400, cuz even though I have always liked the looks of it, I don't know much about it.



All times are GMT -7. The time now is 05:35 AM.