Carbon Fiber Interior Trim
#31
Driver
Thread Starter
Join Date: Dec 2011
Location: Florida
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Looking forward to it!
Thank you good sir.
I have not read the full tutorial but seems good. The only important parts I will add-
Before laying the carbon on the Panel be sure the panel is black. Since you are only doing 1 layer of carbon. If the weave shifts and your panel is red. You will see it.
Second thing, again before laying your carbon, put some epoxy to and let it dry to tack. By doing so, it will be much easier getting the fiber to stick once u get it down.trust me it makes 100% difference.
Good luck, there are also plenty of "laminating" tutorials on YouTube.
Before laying the carbon on the Panel be sure the panel is black. Since you are only doing 1 layer of carbon. If the weave shifts and your panel is red. You will see it.
Second thing, again before laying your carbon, put some epoxy to and let it dry to tack. By doing so, it will be much easier getting the fiber to stick once u get it down.trust me it makes 100% difference.
Good luck, there are also plenty of "laminating" tutorials on YouTube.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Randre19
Chicago Lexus Club
3
10-02-14 10:30 PM
PYSpeed.com
Club Lexus Vendor Marketplace
24
07-25-13 04:10 PM