When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Work LS105
F: 19x9 +25 with 15mm spacers (19x9 +10 effectively) 225/40/19 Hankook Evo V12
R: 19x10 +25 with 3 mm spacers (19x10 +22 effectively) 245/35/19 Federal 595
Work LS105
F: 19x9 +25 with 15mm spacers (19x9 +10 effectively) 225/40/19 Hankook Evo V12
R: 19x10 +25 with 3 mm spacers (19x10 +22 effectively) 245/35/19 Federal 595
Did you have to pull your front fenders for that or just a roll? It looks really good.
Nah and thanks. The fronts were just hammered flat with a deadblow mallet and a heatgun, though it also helps that I'm running a minuscule stretch and about -4.5 camber up front
19x9.5 Konig Oversteer on 255x35s. Just put a set of Yokohama's on them. Ride nice so far. Needs to get some new struts with some lowering springs to drop her down a couple inches. Any recommendations on springs?
Aletz, if you're trying to drop more than 0.9-1.5 inches, then you'll have to go coilovers. Sorry, but you'll have to roll and pull the fenders as well if you go lower than 2 inches. A little negative camber is probably in order too, especially on the front.