Canadian 1991 Toyota Soarer
#1
Rookie
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Location: BC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
VIDEO ON PAGE 3 AND 4
Updates on every page. Last updated: March 7th, 2011
Hey guys, been lurking for a while and I apparently need 30 active posts to post in the classified section (need to sell a bunch of stuff in the near future) so here goes! Some fresh JDM goodness for ya'll, a real Soarer! It's currently in the process of a single turbo conversion. It is stripped and lightened, 5 speed swap and some other cool stuff. Specs below, I'll update as it goes! Currently is getting custom exhaust and intercooler piping fabbed up by JBDR here in Kelowna, BC. Aiming for 500-550rwhp on 91 + water/meth.
1991 Diamond White Pearl Toyota Soarer on Black interior
Internally stock 1JZ-GTE, no sunroof, no traction control, no exterior antenna, etc.
Engine:
-Precision 6076 .81 A/R turbo
-SupraStore Quicksilver QSV SS 304SS Manifold
-Tial MVR 44mm wastegate
-Tial Q 50mm BOV
-Titan oil feed/return kit
-Mishimoto aluminum radiator
-K&N 4" Intake
-Greddy 3" intercooler
-Driftmotion 3" polished intercooler piping
-JBDR 3" downpipe to 3" muffler to 2.5" dual exhaust with custom tips
-Aquamist DDS3 water methanol injection kit
-Driftmotion SS ALT/PS/FAN and underdrive pulleys
-New OEM Toyota ignitor, coil pack, water pump and timing belt @ 131,000km
Fuel:
-Purple HKS fuel rail 14mm
-6x PTE 780cc injectors matched
-Walbro 255lph in tank fuel pump
-Walbro 255lph in line fuel pump
-Fuel Lab fuel pressure regulator and gauge
-SS -6 fuel feed line
-Jeg's in-line fuel filter
Interior:
-2x Bride Maxis III Low Max seats
-Custom seat mounts + sliding rails
-interior stripped and cleaned (excluding dash and door panels)
-Nardi Classic 320mm steering wheel
-Powered by Max "Copper" drift ****
-Powered by Max "Copper" adjustable shift ****/Lonza CF shift ****
-Custom fiberglass gauge holder angled towards driver
-Broadway wide *** mirror
Exterior:
-Vertex front bumper
-Vertex side skirts
-Vertex rear bumper
-Vertex canards
-Origin roof spoiler
-Illest chrome car badge
Electronic:
-AEM Version 2 EMS
-AEM boost control solenoid
-AEM UEGO wideband gauge
-Prosport "Performance" boost, water temp, oil temp, oil pressure gauges
-Aquamist 2D meth gauge
-Compustar 2-way alarm w/turbo timer
-Taylor aluminum battery relocate
-Taylor external battery kill switch
Drivetrain:
-R154 5 speed transmission swap
-OEM Soarer clutch peddle assembly (rare as hell)
-ORC 709 Twin Plate (sounds like knife blades....)
-Steel braided clutch line
Footwork:
-Powered by Max coilovers 18/20kg
-Kumho SPT 215/35/18 front and 235/35/18 rear
-4x XXR 006 18x9.5 +35 in custom BMW Solid Gold Metallic
-4x 18x8 Random white drift spares on Yokohama Parada's
-Project Kics Neo Chrome R40 extended/open lug nuts
-Powered by Max gold valve stems
-H&R 25mm rear spacers
Brakes:
-Wilwood Proportioning Valve
-ABS delete with new lines
Other:
-TSPNY 6000k HID low beam
-Rolled fenders
-A/C, cruise control, charcoal canister delete
-12" JL trunk mounted sub + Celsior 6 disc cd changer for stock deck
-Fire extinguisher
Plans for the Soarer (not in order):
-Vertex widebody rear quarters
-Racing Greed tune
-Weds Kranze LXZ 19's
-brake ducts from fog lights
-intake duct from high beam
-LS400/Supra BBK
-Kaaz 2 way LSD
-NRG rose gold quick release hub
-Double din 7" nav/dvd
-Bosch 044 inline fuel pump and surge tank
-D-spec roll cage + harness bar
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/375237_10151046318735062_584275061_21515038_1106278178_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/407309_10151046318825062_584275061_21515040_856884753_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/383200_10151046318915062_584275061_21515042_889777657_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/399158_10151046319080062_584275061_21515044_908559349_n.jpg)
me getting a ticket for being too low... lol (still riding static!)
Updates on every page. Last updated: March 7th, 2011
Hey guys, been lurking for a while and I apparently need 30 active posts to post in the classified section (need to sell a bunch of stuff in the near future) so here goes! Some fresh JDM goodness for ya'll, a real Soarer! It's currently in the process of a single turbo conversion. It is stripped and lightened, 5 speed swap and some other cool stuff. Specs below, I'll update as it goes! Currently is getting custom exhaust and intercooler piping fabbed up by JBDR here in Kelowna, BC. Aiming for 500-550rwhp on 91 + water/meth.
1991 Diamond White Pearl Toyota Soarer on Black interior
Internally stock 1JZ-GTE, no sunroof, no traction control, no exterior antenna, etc.
Engine:
-Precision 6076 .81 A/R turbo
-SupraStore Quicksilver QSV SS 304SS Manifold
-Tial MVR 44mm wastegate
-Tial Q 50mm BOV
-Titan oil feed/return kit
-Mishimoto aluminum radiator
-K&N 4" Intake
-Greddy 3" intercooler
-Driftmotion 3" polished intercooler piping
-JBDR 3" downpipe to 3" muffler to 2.5" dual exhaust with custom tips
-Aquamist DDS3 water methanol injection kit
-Driftmotion SS ALT/PS/FAN and underdrive pulleys
-New OEM Toyota ignitor, coil pack, water pump and timing belt @ 131,000km
Fuel:
-Purple HKS fuel rail 14mm
-6x PTE 780cc injectors matched
-Walbro 255lph in tank fuel pump
-Walbro 255lph in line fuel pump
-Fuel Lab fuel pressure regulator and gauge
-SS -6 fuel feed line
-Jeg's in-line fuel filter
Interior:
-2x Bride Maxis III Low Max seats
-Custom seat mounts + sliding rails
-interior stripped and cleaned (excluding dash and door panels)
-Nardi Classic 320mm steering wheel
-Powered by Max "Copper" drift ****
-Powered by Max "Copper" adjustable shift ****/Lonza CF shift ****
-Custom fiberglass gauge holder angled towards driver
-Broadway wide *** mirror
Exterior:
-Vertex front bumper
-Vertex side skirts
-Vertex rear bumper
-Vertex canards
-Origin roof spoiler
-Illest chrome car badge
Electronic:
-AEM Version 2 EMS
-AEM boost control solenoid
-AEM UEGO wideband gauge
-Prosport "Performance" boost, water temp, oil temp, oil pressure gauges
-Aquamist 2D meth gauge
-Compustar 2-way alarm w/turbo timer
-Taylor aluminum battery relocate
-Taylor external battery kill switch
Drivetrain:
-R154 5 speed transmission swap
-OEM Soarer clutch peddle assembly (rare as hell)
-ORC 709 Twin Plate (sounds like knife blades....)
-Steel braided clutch line
Footwork:
-Powered by Max coilovers 18/20kg
-Kumho SPT 215/35/18 front and 235/35/18 rear
-4x XXR 006 18x9.5 +35 in custom BMW Solid Gold Metallic
-4x 18x8 Random white drift spares on Yokohama Parada's
-Project Kics Neo Chrome R40 extended/open lug nuts
-Powered by Max gold valve stems
-H&R 25mm rear spacers
Brakes:
-Wilwood Proportioning Valve
-ABS delete with new lines
Other:
-TSPNY 6000k HID low beam
-Rolled fenders
-A/C, cruise control, charcoal canister delete
-12" JL trunk mounted sub + Celsior 6 disc cd changer for stock deck
-Fire extinguisher
Plans for the Soarer (not in order):
-Vertex widebody rear quarters
-Racing Greed tune
-Weds Kranze LXZ 19's
-brake ducts from fog lights
-intake duct from high beam
-LS400/Supra BBK
-Kaaz 2 way LSD
-NRG rose gold quick release hub
-Double din 7" nav/dvd
-Bosch 044 inline fuel pump and surge tank
-D-spec roll cage + harness bar
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/375237_10151046318735062_584275061_21515038_1106278178_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/407309_10151046318825062_584275061_21515040_856884753_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/383200_10151046318915062_584275061_21515042_889777657_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/399158_10151046319080062_584275061_21515044_908559349_n.jpg)
me getting a ticket for being too low... lol (still riding static!)
Last edited by Phamtom; 03-07-12 at 11:17 AM.
Trending Topics
#8
Rookie
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Location: BC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/405504_10151046314930062_584275061_21515022_866234034_n.jpg)
Me getting my turbo stuff in!!
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/390121_10151046315195062_584275061_21515025_1266822117_n.jpg)
How the manifold looks
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/384118_10151046314520062_584275061_21515021_1791384899_n.jpg)
The turbo in all it's glory!!
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/401498_10151046316680062_584275061_21515030_1251570746_n.jpg)
And digging into the engine bay to remove the twins...
I have lots of pictures, so I'll slowly post them up in this thread. The build is still in progress so lots of exciting pictures for me too! I want to do an intake pipe for the left high beam and brake ducts for the "cornering light" holes. Super excited for that part! Started out as a drift machine but the more I get into it, the more I want it to be a time attack machine (unusual, I know... but the RH9 Auto Bahn Soarer inspires me).
And yes! Should definitely start a Canadian SCxxx/Soarer club
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Edit: Here's the build I'm referring to: http://speedhunters.com/archive/2011...hn-soarer.aspx
![](http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Dino%20Dalle%20Carbonare/2011/FEB2011/AB-Soarer/AB-JZZ30-156.jpg)