help with aftermarket head unit install
#1
Lexus Test Driver
Thread Starter
help with aftermarket head unit install
Hello got a JDM twin turbo soarer, but the radio's are the same as the Lexus sc300. So just wondering if anyone would know what to do about installing an aftermarket headunit (gps/dvd) with these Toyota connectors into the factory radio connectors? Looking to minimize wiring, soldering etc as much as possible.
Do the SC300 factory wiring from the radio fit into these Toyota connectors? These were made to fit late model Corolla, Prado etc... hopefully they just fit in... anyone used the factory wires and can remember if they would fit directly into at least 2 of these connections?
Do the SC300 factory wiring from the radio fit into these Toyota connectors? These were made to fit late model Corolla, Prado etc... hopefully they just fit in... anyone used the factory wires and can remember if they would fit directly into at least 2 of these connections?
Last edited by Parker Gen; 03-25-12 at 07:35 PM.
#2
Lexus Test Driver
Thread Starter
Oh I already had a JVC head unit from previous owner in the car and they have connected through the 2 white factory harness connectors into 1 JVC connector. I'm guessing only the 2 white connections need to be used and not the small blue one since it was all working that way...
Thread
Thread Starter
Forum
Replies
Last Post
Qwerty321
ES - 1st to 4th Gen (1990-2006)
0
01-28-15 01:55 AM
manufan101
LS - 1st and 2nd Gen (1990-2000)
16
01-22-13 06:01 PM
olegmalkin
Lexus Audio, Video, Security & Electronics
11
10-29-03 05:23 PM