painted cluster needles?
#1
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've read the DIYs about repairing the burnt out needles, and have a bad set on the way to try that on --- I figured I'd like to keep needles in the car while I do the repair, because it's a DD for my daughter.
I'm curious if anyone has simply painted the needles, rather than worrying about them being lit. I thought that maybe a little red or white paint would at least make them much easier to see against the black background until I set up some new lighted ones. Now that I have another set one the way, I thought I might do that for a quick, temporary fix. Has anyone tried that, and can you see them? Or will it only help in the daylight?
I'm curious if anyone has simply painted the needles, rather than worrying about them being lit. I thought that maybe a little red or white paint would at least make them much easier to see against the black background until I set up some new lighted ones. Now that I have another set one the way, I thought I might do that for a quick, temporary fix. Has anyone tried that, and can you see them? Or will it only help in the daylight?
#3
Driver
iTrader: (1)
Join Date: Feb 2012
Location: Utah
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The previous owner of my car painted the needles, and it was still very hard to see, and I don't think it is worth potentially ruining a set of needles for that personally. I think it would be easier to just take the tinted plastic off the front and drive like that for the time being. Or get a small self powered LED light and put it at the base of the cluster behind the tinted plastic, that may be enough to light up the needles without doing anything permanent.
Thanks,
Rick
Thanks,
Rick
#7
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It doesn't look good and it would be less effort and more reward to just do it correctly.
__________________
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
![](https://www.clublexus.com/forums/signaturepics/sigpic178522_1.gif)
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
![](https://www.clublexus.com/forums/signaturepics/sigpic178522_1.gif)
Trending Topics
#10
Lead Lap
iTrader: (8)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
I would upload a picture, but I don't seem to have that option. All I can do is imbed a hyperlinked image. Do I not have enough posts yet?
Jason, I'll probably give you a call tomorrow about gauge needles and HVAC LED. Not trying to bypass your services with this question here.
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Getting the bottom middle screw off the back of the cluster to free up the tinted lens for removal took some contorting... It looks ugly removed, but I'll leave it that for the time being, at least until seeing if the "fix" works for nighttime driving. The tint will surely be working against me for that.
#11
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Also I would be careful with the tape, I think are clusters are sensitive to weight on the needles.
I would just check it to make sure the speedometer is still reading correct.
I would just check it to make sure the speedometer is still reading correct.
#12
Lead Lap
iTrader: (8)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yeah, I considered that. I read in one of the threads that there is counter-balancing to take into account when adding more than 4-5 grams worth of weight. I doubt the small amount of tape exceeds that, but I don't have a scale that reads low enough to be sure. At any rate, a speedo that reads a bit off is better than one with a needle I can't see! Unless someone sells replacement needles, rather than just servicing the existing ones, that's my only option for now.
#13
Lead Lap
iTrader: (8)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Reporting back on the white electrical tape quick fix...
1) Speedo and tach seem pretty accurate. The tach idles around 600 rpm and the speedo is right around the speed limit for zones ranging from 30 to 55 mph, cruising along with traffic. If either is off as a result of the weighting, it surely isn't by much.
2) Daytime needle visibility is great, but nighttime is only so-so. You can't really see the tape from straight on, but the edges reflect a bit of the backlight so you can at least see where the needle is. With overhead street lights and what not, you can see it just fine.
I may even be brave enough tomorrow to try it with the tinted lens cover back on.
1) Speedo and tach seem pretty accurate. The tach idles around 600 rpm and the speedo is right around the speed limit for zones ranging from 30 to 55 mph, cruising along with traffic. If either is off as a result of the weighting, it surely isn't by much.
2) Daytime needle visibility is great, but nighttime is only so-so. You can't really see the tape from straight on, but the edges reflect a bit of the backlight so you can at least see where the needle is. With overhead street lights and what not, you can see it just fine.
I may even be brave enough tomorrow to try it with the tinted lens cover back on.
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)