STOCK 1JZ 906rwhp
#48
Lexus Test Driver
iTrader: (4)
But besides that fellas, it's a ZEX kit, it has it's own fuel solenoid for nitrous enrichment.
It's not like he has 750cc injectors supporting 900hp which is what most of you guys are thinking.
And in regards to the RB question, the answer is they have the most horribly designed oil pumps because of the metal used, and overall tinny dimensions.
It's not uncommon to have an RB lose every pound of oil pressure at 7000RPM, completely destroying the engine. That, and they are interference design as well.
I'm pretty sure there hasn't been to many "My 1JZ oil pump exploded" or "1JZ Damn-bent valves again" threads, and because of that a Nissan owner picked up a ton of reliability and a whole bunch of stock head power!.
It's not like he has 750cc injectors supporting 900hp which is what most of you guys are thinking.
And in regards to the RB question, the answer is they have the most horribly designed oil pumps because of the metal used, and overall tinny dimensions.
It's not uncommon to have an RB lose every pound of oil pressure at 7000RPM, completely destroying the engine. That, and they are interference design as well.
I'm pretty sure there hasn't been to many "My 1JZ oil pump exploded" or "1JZ Damn-bent valves again" threads, and because of that a Nissan owner picked up a ton of reliability and a whole bunch of stock head power!.
#52
Driver School Candidate
Join Date: Nov 2012
Location: bc
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
#53
Driver
iTrader: (1)
Join Date: Mar 2012
Location: Tn
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
I was basing all of my comments knowing that he was running 65psi press. There's other factors you have to key in here. Such as BSFC. When I was doing the math quickly on this I wasn't 100% sure off the top of my head what BSFC was for q16. I still stand by the fact that those injectors have got to be damn near maxed out lol. But again he's done an awesome job getting it to make the power it did.
#54
Driver School Candidate
Join Date: Nov 2012
Location: bc
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I was basing all of my comments knowing that he was running 65psi press. There's other factors you have to key in here. Such as BSFC. When I was doing the math quickly on this I wasn't 100% sure off the top of my head what BSFC was for q16. I still stand by the fact that those injectors have got to be damn near maxed out lol. But again he's done an awesome job getting it to make the power it did.
Thread
Thread Starter
Forum
Replies
Last Post