Blacked out chrome window trim ??? pics..?
#67
Lead Lap
iTrader: (1)
Join Date: Feb 2008
Location: I.E Southern California to SA,Texas
Posts: 4,447
Likes: 0
Received 5 Likes
on
5 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just did this lil mod, I 1st used plasti-dip but after it dried i wasn’t feeling it so i removed it. The next day i went ahead with the blackout tape route ... it looks amazing once finished especially on a black SC, i highly recommend it ![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
#71
#72
Lexus Fanatic
iTrader: (13)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I did mine. It looks better than it did, but the stuff seems to peel back off pretty easily. Would be nice if there was a way to spray something over the top to stop it from peeling back off so easily.
Suggestions: as mentioned above, either remove the tape while it's still wet or else be prepared to go around the whole thing with a blade to remove your tape.
Suggestions: as mentioned above, either remove the tape while it's still wet or else be prepared to go around the whole thing with a blade to remove your tape.
#73
Lexus Champion
iTrader: (8)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Here is mine in vinyl. I completed this in about an hour using two 1/2" long stripes of oracal matte black wrapping film. It came out pretty nice but I had to overlap a few pieces around the round curves. Most car dealers do this when wrapping window trim so I made it look pretty factory. I know my 2008 Honda Fit and my old 2003 MazdaSpeed Protege both have window trims wrapped with matte vinyl.
![](https://i77.photobucket.com/albums/j61/ShaneTabaka/IMAG0989_zps0f7c581e.jpg)
Here's a close up of my custom vinyl pillar that I completed last year. It's still holding up very well.
![](https://i77.photobucket.com/albums/j61/ShaneTabaka/IMAG0989_zps0f7c581e.jpg)
Here's a close up of my custom vinyl pillar that I completed last year. It's still holding up very well.
![](https://sphotos-a.xx.fbcdn.net/hphotos-snc7/113_3928474043358_870767396_n.jpg)
Last edited by Tabaka; 01-24-13 at 08:39 AM.