this looks like the right one. 5 pins right?
https://www.superbrightleds.com/more...asher/784/838/

 

is this the right one for the 2 map lights?
http://www.superbrightleds.com/morei...-bulb-4-led/6/

 

I believe the map lights are festoon bulbs.

Edit, I was thinking of the dome light.
This post may help.

 

Sweet thanks.

 

Old Man, I've collected these:

1992 Lexus SC400 Car Light Bulb Size Diagram
Low Beam Headlamp Light Bulb Size: 9006 or 9006 HID Upgrade Kit
High Beam Headlamp Light Bulb Size: 9005 or 9005 HID Upgrade Kit
Parking Light Bulb Size: 168
Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 1156
Tail Light Bulb Size: 1157
Stop Light Bulb Size: 1157
High Mount Stop Light Bulb Size: 1156
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 1156
Front Side Marker Light Bulb Size: 168
Rear Side Marker Light Bulb Size: 168
Glove Box Light Bulb Size: 74
Map Light Bulb Size: 2040
Dome Light Bulb Size: 194
Trunk/Cargo Area Light Bulb Size: 194
Instrument-General Light Bulb Size: 194
Interior lights and bulb type numbers:
Dome: 31mm festoon / DE3175 / Polarg M16
Map: BA9 / 1895 / Miniature bayonet / Polarg M17
Doors: 194 / 168 / Polarg M4
Footwell: 74
Ignition: 74
Visors/vanity: 31mm "vanity type" / Polarg M24 may fit
Glovebox: 74
Trunk: 194 / 168 / Polarg M4

I'd pull out your old lights and compare - the festoon lights come in a few different lengths so make sure you order the right one.
I put LED's in my Tacoma and they really helped - a ton. For my main cabin light (it's an extended cab), I got one of those festoon bulbs that's connected to a 2"X2" circuit board packed full of LED's. It really lights up the place.
I opted not to put LED's into my SC's map lights because I don't like their angle - instead of pointing straight down, they're pointed back a little so they are partially shining into my eyes. My wife sometimes turns them on while we're driving and forgets to turn them off. I know I'd be blinded if I put LED's in there so that's why I left the old ones in...

RE: the flasher, check out the first page of this thread - there's a link for an entirely different flasher so you may want to check that out. I haven't done mine yet so I'm not sure who's right, how many pins on it, or maybe you pulled out the wrong one ?

 

well mine had 5, and it said flasher on it i think. when i took it out the turn signals stopped working so it had to be the right one lol.

 

Yeah, it should be quite large with 5 pins. I had a picture of it on that album that I linked earlier.

 

Hey guys, we have all of these LED's in stock and ready to ship.

The 168's are $1.99
http://www.taninautoelectronix.com/T...p/t10_5led.htm

The 74's are $1.99
http://www.taninautoelectronix.com/T...-p/t5_3led.htm

The festoons are $2.99-$9.99 depending on brightness
http://www.taninautoelectronix.com/F...estoon_led.htm

We also have the 1156 and 1157 LEDs
http://www.taninautoelectronix.com/1...6_tall_led.htm

http://www.taninautoelectronix.com/1...p/1157_led.htm

Let us know if we can assist with anything related to LED lighting and support a vendor!

 

so installed the flasher... FAIL. when i choose the left turn signal both the signals flash, and when i choose the right, nothing happens at all. hazards work, they flash at the right rate though. the pins are identical to the stock one. something different about the flasher then i guess.

 

Try buying the one I have. I'm pretty sure it's the same, 'cause it worked on my 95 and now on my 96.

 

Ok I will.

 

ordered the one u showed me, the 3 pin one. we'll see if that works, should get it wednesday or thursday

 

I'm curious to see if the flasher works. I have a 93 with 95 tails so I already have the hyperblink issue.

 

i'll let everyone know

 

Unfortunately this is exactly what happened to me. Looking forward to see if the other flasher works.