back in game
#32
Mods could you move this to build threads please.
Finally had some time to work on my project. Started by dying the dash, door panels, and door wood trim black. Picked up a new steering wheel from a 2002 es330. The last owner did a number on everything on this car. 3/4 of the bolts in the center console are gone
Starting to fill the **** holes for temp and Radio controls. First time doing this and I hope it works out. Used a plastic filler that can be sanded to fill the holes. I saw a few people used Fiberglass but I never used that before. Heading out of the country for a bit and when I come back I'll finish the interior then fix the body.
Finally had some time to work on my project. Started by dying the dash, door panels, and door wood trim black. Picked up a new steering wheel from a 2002 es330. The last owner did a number on everything on this car. 3/4 of the bolts in the center console are gone
Starting to fill the **** holes for temp and Radio controls. First time doing this and I hope it works out. Used a plastic filler that can be sanded to fill the holes. I saw a few people used Fiberglass but I never used that before. Heading out of the country for a bit and when I come back I'll finish the interior then fix the body.
#35
As I was taking the center console out, i notice that when my driver's door is close the trim doesn't line up. I check my passage and it s fine. I know the hinge is needs new bushing or just replaced all together, but should the door line up straight when close?
Driver's side
passengerside
Driver's side
passengerside
Thread
Thread Starter
Forum
Replies
Last Post
CLRH2O
Performance & Maintenance
0
09-14-10 01:26 PM