Need help asap please with wiring resistor pack for my jdm 2jzgte aristo
#1
Need help asap please with wiring resistor pack for my jdm 2jzgte aristo
So I bought some 550cc injectors off a mk4 and a mk3 resistor pack that has 4 wires. there is a black and red wires for each the injector connectors. neg and pos. I cut both wires and tapped the ends on the red wires. Then I wired the black wires of injector 1 and 2 together with a bullet connector. Then I put the bullet connecter into a butt connector and wired one wire from the butt connector straight to the resistor pack... I did that to all the injectors. 1-2, 3-4, 5-6. So after that I wired a wire from my battery 12v straight to my resistor pack. I go to start my car and it wont fire up. Someone please help. I'm stressed.. I've been trying to get my car running for a long time now. Please tell me what I messed up on or what I need to do to get my injectors working.. I got these instructions from a guy that was trying to help me through facebook.
This photo is exactly how I did it. Its just that instead of 6 wires going into the box I have 3 because I wired 2 injector wires together.
This photo is exactly how I did it. Its just that instead of 6 wires going into the box I have 3 because I wired 2 injector wires together.
Last edited by rxiong918; 09-18-14 at 04:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post