SSmith

iTrader: (7)

Okay guys, I'm going to be installing a DRL module and of course it has to be installed to the high beam lights. I know I can tap the wire at the light but I'd light to try and keep everything in the car and under the dash. I'm assuming the both positive wires leave the fuse block at the drivers side foot well. I didn't see anything at the fuse box under the hood. It sure would be nice if someone could tell me which plug these wires are in at the fuse block. I don't have a wiring schematic for the car and if someone knows it will save me a ton of time.

Thanks,

Shane

pogoism9

iTrader: (1)

What year car? Also there should be a pair of fuses under the hood in the fuse box for the highs

SSmith

iTrader: (7)

97 model. There are no fuses in the fuse box for the high beams under the hood. The low beam fuses are there but not the high beam.

Shane

pogoism9

iTrader: (1)

Ok, this should tell you then The 96 info should work. For some reason they have different setups per engine during that period.