SC- 1st Gen (1992-2000)

2jz-gte, 6-speed, sc300 complete

Thread Tools
 
Search this Thread
 
Old 07-07-03, 03:42 AM
  #1  
whiteSc3
Intermediate
Thread Starter
iTrader: (1)
 
whiteSc3's Avatar
 
Join Date: Feb 2003
Location: Colorado
Posts: 475
Received 3 Likes on 2 Posts
Default 2jz-gte, 6-speed, sc300 complete

The car has been done for over a week, but I haven't had any time to post on hear so.. Its a 93 sc300 with 2jz-gte, the project took 41/2 months (lots of mods):2jz-gte(new short block,3angle valve job, extrude honed head,
bluprinted injectors) the car is full BPU(nothing else can be added to stock

twins, except cams) with an AEM EMS. It is running a RPS stage 3 sprung hub clutch with a Fidanza fly wheel. All of the work was done at Redlinemotorsports in Ft. Collins Colorado. www.4redlinemotorsports.com . The guys who worked on my car did very good work , they have tons of experence with Supras and did an almost factory looking install. The car is heavily modified, and with all of the mods I ended up paying less than most people pay for just the swap. I would suggest that anyone slightly interested in doing the swap give them a call @ 970-221-4805 and tell them that I sent you. Here are some pictures.
Old 07-07-03, 05:04 AM
  #2  
adidosc
Lexus Champion

 
adidosc's Avatar
 
Join Date: Mar 2003
Location: Pennsylvania
Posts: 3,525
Likes: 0
Received 1 Like on 1 Post
Post

very impressive!
Old 07-07-03, 07:59 AM
  #3  
Pyroneer
Rookie
 
Pyroneer's Avatar
 
Join Date: Jul 2003
Location: Maryland
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default horsepower and price

God I want to do this.... but money, money, money....

Speaking of which, how much money did you end up spending altogether for the swap and mods? Also, I imagine that the car has been dynoed, so what did you end up getting as the RWHP?

Pyroneer
Old 07-07-03, 12:31 PM
  #4  
Richie
Lexus Fanatic
 
Richie's Avatar
 
Join Date: May 2001
Location: Netherlands
Posts: 19,103
Likes: 0
Received 1 Like on 1 Post
Default

That looks like a nice sleeper !
Old 07-07-03, 01:52 PM
  #5  
V12EATER
Driver School Candidate
 
V12EATER's Avatar
 
Join Date: May 2003
Location: Ohio
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice swap!
Old 07-07-03, 08:41 PM
  #6  
THE_CEO
Pole Position
 
THE_CEO's Avatar
 
Join Date: Oct 2002
Location: Michigan
Posts: 3,199
Received 47 Likes on 39 Posts
Default

yeah this is truly a sleeper!...with TT rims..

CEO
Old 07-07-03, 09:18 PM
  #7  
eericn
Rookie
 
eericn's Avatar
 
Join Date: Mar 2001
Location: Fort Collins, CO 80521
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default Looks Good

i can voutch for the good clean swap. I saw your car down at redline just before it was finnished and damn it looked good. I was hoping you see you run it down at thee import races in denver but they said that was a problem with the clutch - hope that all got cleared up. Very well done!! hope to see you at redline on the 12 for their grand opening.
Ethan
Old 07-07-03, 11:02 PM
  #8  
wmulli
Lead Lap
 
wmulli's Avatar
 
Join Date: Feb 2002
Location: New Jersey
Posts: 727
Likes: 0
Received 1 Like on 1 Post
Default

Did they supply the motor and trans or was it a BYO? And why did it take 4 1/2 months? I know you said they did a lot of work, but that still seems like an awful long time. Where was the bottleneck(s)??

Beautiful job! I'm sure it was worth the wait! Congrats!
Old 07-09-03, 06:02 PM
  #9  
whiteSc3
Intermediate
Thread Starter
iTrader: (1)
 
whiteSc3's Avatar
 
Join Date: Feb 2003
Location: Colorado
Posts: 475
Received 3 Likes on 2 Posts
Default

I had a wrecked supra to pull everything out of. The reason it took so long is beacause of the wait for the parts such as the tranny, which took over a month to get then it could be droped. If you look around 41/2 months is not long for this swap, now that they are done with the first one(me) they should be able to pop them out. *Could a mod move this to the motor section, I think it is better suited their.
Old 07-09-03, 06:03 PM
  #10  
whiteSc3
Intermediate
Thread Starter
iTrader: (1)
 
whiteSc3's Avatar
 
Join Date: Feb 2003
Location: Colorado
Posts: 475
Received 3 Likes on 2 Posts
Default

Go here for an idea of all the stuff done to the car.
Old 07-09-03, 07:49 PM
  #11  
SCLEX
Pole Position
 
SCLEX's Avatar
 
Join Date: Jun 2002
Location: Texas
Posts: 276
Likes: 0
Received 0 Likes on 0 Posts
Default

That looks AWESOME! - do you have any times for it?

-Richard
Old 07-10-03, 09:10 AM
  #12  
5speed300
Pole Position
 
5speed300's Avatar
 
Join Date: Nov 2002
Location: North Carolina
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

What is a good place or website to go if I was looking for US spec supra 2JZ-GTE engines and electronics? I have had a tough time finding any.

Last edited by 5speed300; 07-10-03 at 09:10 AM.
Old 07-10-03, 10:51 AM
  #13  
speedking
Pole Position
iTrader: (3)
 
speedking's Avatar
 
Join Date: Jul 2003
Location: Colorado
Posts: 316
Likes: 0
Received 1 Like on 1 Post
Default Re: Looks Good

Originally posted by eericn
Very well done!! hope to see you at redline on the 12 for their grand opening.
Ethan
Hey Ethan,

Where is Redline Motorsports located in the Fort. A buddy and I might stop by for their Grand celebration.

--Sean
Old 07-10-03, 07:23 PM
  #14  
boredguy77
Lead Lap
 
boredguy77's Avatar
 
Join Date: Jun 2002
Location: Texas
Posts: 560
Likes: 0
Received 0 Likes on 0 Posts
Default

I like it man, I hope one day I can get around to polishing my TT wheels so they shine like yours.
Old 07-10-03, 10:13 PM
  #15  
whiteSc3
Intermediate
Thread Starter
iTrader: (1)
 
whiteSc3's Avatar
 
Join Date: Feb 2003
Location: Colorado
Posts: 475
Received 3 Likes on 2 Posts
Default

What is a good place or website to go if I was looking for US spec supra 2JZ-GTE engines and electronics? I have had a tough time finding any.
Your best bet is www.supraforums.com, alos try www.thepartstrader.com
Where is Redline Motorsports located in the Fort.
Their addy is 1925 TimberlineRd., Ft.collins 80525. Try mapquest, or go to their site. redlinemotorsports


Quick Reply: 2jz-gte, 6-speed, sc300 complete



All times are GMT -7. The time now is 08:26 AM.