Automatic center console removal
11-09-07, 09:35 AM
#1
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Feb 2007
Location: Ny
Posts: 1,298
Likes: 0
Received 0 Likes
on
0 Posts
Automatic center console removal
Ok I am working on a project to spice up my interior a little bit. I know many here will not agree with it but I have seen it done other places and done correctly it adds some uniqueness to ones interior. I am heavily into the drift scene so my car is more that style than vip. I will be covering my center console in a picture of the famous great wave painting.
I searched the site and could not find an directions on removing the "face plate" on the automatic shifter. I'd imagine the **** itself needs to be removed. The radio should be easy and the climate control can be removed once the radio has been. I am just unsure about the shifter plate
I searched the site and could not find an directions on removing the "face plate" on the automatic shifter. I'd imagine the **** itself needs to be removed. The radio should be easy and the climate control can be removed once the radio has been. I am just unsure about the shifter plate
11-09-07, 09:42 AM
#4
Pole Position
iTrader: (4)
Join Date: Sep 2006
Location: GA
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Turn off the car and park it somewhere flat. Then put it in N, pull down the plastic sheathing at the base of the shifter and remove the 2 screws there. The shifter will then come off and the faceplate just pops off after that.
11-09-07, 09:50 AM
#5
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Feb 2007
Location: Ny
Posts: 1,298
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. I'll post pictures when its finished. I am an artist and have an actual real wood blocked print of that picture in my house. I am deciding on whether or not to hand paint the pieces myself or just use a poster spray adhesive and matte clear over that. I'm unsure which of the two is less disrepsectful to the work.
11-09-07, 05:18 PM
#6
I know what you are talking about, I think it would be cool, there was a magazine awhile back that had a hachi and s13 with that painting on their CF hoods. Pretty cool sounding, I'd like to see it first.
So are you getting a print of that, then cutting it to fit?
So are you getting a print of that, then cutting it to fit?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
xbladex00
GS - 3rd Gen (2006-2011)
2
02-23-16 05:00 PM
DroppedGS
GS - 1st Gen (1993-1997)
14
04-12-03 11:42 AM
