LS400 inner door handle sin an SC300
#1
LS400 inner door handle sin an SC300
So my inside passenger door handle was broken in half when i bought my car. Knowing that i had to replace it but i've kept putting it off....so today i finally went to a local JY.
To make a long story short; there were no SC's in the whole lot...but i found an 1990 LS400 and when i looked at the inner door handles, they seem almost IDENTICAL to out SC inner door handles.
So i left the JY with a passenger side inner handle.
Now my question is, before i attempt to see if it fits...does anyone know if 1990 LS door handles bolt right up to the SC300 as a replacement?
To make a long story short; there were no SC's in the whole lot...but i found an 1990 LS400 and when i looked at the inner door handles, they seem almost IDENTICAL to out SC inner door handles.
So i left the JY with a passenger side inner handle.
Now my question is, before i attempt to see if it fits...does anyone know if 1990 LS door handles bolt right up to the SC300 as a replacement?
Trending Topics
#13
Driver School Candidate
Join Date: Feb 2009
Location: GA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Only the door handle worked for me, you will need a grinder since the pin holding the chrome handle in place is slightly larger than the stock. The mechanism (holder) for the Ls400 was completely different than the stock.
Then again i used the handle from a 1992 or 1993 so it may be different
Then again i used the handle from a 1992 or 1993 so it may be different
#14
Only the door handle worked for me, you will need a grinder since the pin holding the chrome handle in place is slightly larger than the stock. The mechanism (holder) for the Ls400 was completely different than the stock.
Then again i used the handle from a 1992 or 1993 so it may be different
Then again i used the handle from a 1992 or 1993 so it may be different
oh well. it was worth a try.