Any pre-95 retrofitted corner lamps?
#1
Any pre-95 retrofitted corner lamps?
**One light is finished!! Final product pictures posted**
Im sure most have you have noticed that I dont have the stock cornering lamps on my SC, but I have some projector fogs in place of them..well I recently found my stock cornering lamps and discovered that they could be retrofitted into the cornering housings fairly easily, and was wondering if anyone else has done a retrofit on them to make them actual fog lamps, not this faux-fog flubber...
Also is it possible to deline the inside of the cornering lamp lenses? Or is there not enough material to sand down?
Im sure most have you have noticed that I dont have the stock cornering lamps on my SC, but I have some projector fogs in place of them..well I recently found my stock cornering lamps and discovered that they could be retrofitted into the cornering housings fairly easily, and was wondering if anyone else has done a retrofit on them to make them actual fog lamps, not this faux-fog flubber...
Also is it possible to deline the inside of the cornering lamp lenses? Or is there not enough material to sand down?
Last edited by turbodremz; 03-01-10 at 05:54 PM.
#4
I had though about just doing the bulb sockets, but the fog lights I have on my bumper now work excellent and I just ordered a 3000k set of HID's for them (yes they have a nice cut off) and would like to keep them in play, but prefer the stock look of the cornering lamps.
I guess I will pull out the dremel and start cutting and see how it turns out. Thanks for chiming in Phoenix..wire up your lights and post some pictures of how they turned out.
I guess I will pull out the dremel and start cutting and see how it turns out. Thanks for chiming in Phoenix..wire up your lights and post some pictures of how they turned out.
Trending Topics
#9
Lexus Test Driver
iTrader: (2)
Join Date: Aug 2009
Location: MA
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
where did you get the projectors? i can see this being an awesome DIY for us 92-94 guys
cause right now i have LED corner lamps modded to fogs and they look great when on with the LED city lamps together. but i would totally prefer HIDs
cause right now i have LED corner lamps modded to fogs and they look great when on with the LED city lamps together. but i would totally prefer HIDs
#10
I actually got them from ebay a couple years ago, but I havent seen the same ones since then. I ordered another set that I though were the same, but they didnt have a cutoff line, so I trashed them.
They are very similar to the Hella E13 projectors, and if you do a search on ebay you will see them.
I will get started on them this weekend if I get some time.
They are very similar to the Hella E13 projectors, and if you do a search on ebay you will see them.
I will get started on them this weekend if I get some time.
#11
Lexus Test Driver
iTrader: (2)
Join Date: Aug 2009
Location: MA
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
alright man keep us posted. i'm interested in this
edit: okay, i searched ebay and it looks like there is a pretty wide variety of projectors to choose from. my question is, if I were to pick up some of these projectors, how would we wire them up to the car...especially since there is no factory headlight output clip like the low-beam headlights to plug HID's into...
edit: okay, i searched ebay and it looks like there is a pretty wide variety of projectors to choose from. my question is, if I were to pick up some of these projectors, how would we wire them up to the car...especially since there is no factory headlight output clip like the low-beam headlights to plug HID's into...
Last edited by BostonSC4; 02-24-10 at 11:06 AM.
#15
Im just going to use a relay, and when my new shift bezel comes in, Im going to find a fog light switch from another vehicle to try and obtain the factory installed look on the inside.