Toyota Soarer - BLK/BLK||GT35R||VPRO - Canadian Build
#1
Toyota Soarer - BLK/BLK||GT35R||VPRO - Canadian Build
Never started a thread on ClubLex before, nor have I really posted at all.. mostly just creeped nessecary threads. But with alot of the members in my club frequenting this site I thought I should make an appearance.
I own a 2002 Lexus IS300 but this thread will be about my 1992 JDM Toyota Soarer
My IS300 CL Build Thread can be found here:
PoorForm - IS300 Build Thread - CLUBLEXUS
Purchased it about 2 weeks ago before I went to work, got it for a STEAL of a price... as there is a issue with it going past 3500rpm while under load (neutral it is fine).. I couldnt say no to the price as the parts alone paid for the car 2-3 times over.. so began the project.
As with my IS300, quality is key, tearing out old junk and putting in the proper parts to make a killer car. This car will be no exception, I bought it because it had quality parts, but there were some things that just needed to be replaced. The "before" and "after" mods list comparisons will be more than enough proof to show the strive for quality!
This car will be built by myself and my good friend Jimmy Bailey of Vex Performance in Calgary, AB along with the help of the shop owner, Ryan Chipchase. Thanks to anybody else who lends a hand as well as I'm sure some of the bro's will come out to wrench!
Tuning: Jimmy Bailey (Bippu147)
Also Thanks To:
Ryan Chipchase of Vex Performance - Calgary, AB
This is a POORFORM member car -- POORFORM FACEBOOK PAGE
What I bought it with:
What I have ordered or am in the process of getting installed on the car since purchase:
First things first, some introduction pictures of the car as I bought it:
Thanks for checking in, I'll try my best to keep this updated.
I own a 2002 Lexus IS300 but this thread will be about my 1992 JDM Toyota Soarer
My IS300 CL Build Thread can be found here:
PoorForm - IS300 Build Thread - CLUBLEXUS
Purchased it about 2 weeks ago before I went to work, got it for a STEAL of a price... as there is a issue with it going past 3500rpm while under load (neutral it is fine).. I couldnt say no to the price as the parts alone paid for the car 2-3 times over.. so began the project.
As with my IS300, quality is key, tearing out old junk and putting in the proper parts to make a killer car. This car will be no exception, I bought it because it had quality parts, but there were some things that just needed to be replaced. The "before" and "after" mods list comparisons will be more than enough proof to show the strive for quality!
This car will be built by myself and my good friend Jimmy Bailey of Vex Performance in Calgary, AB along with the help of the shop owner, Ryan Chipchase. Thanks to anybody else who lends a hand as well as I'm sure some of the bro's will come out to wrench!
Tuning: Jimmy Bailey (Bippu147)
Also Thanks To:
Ryan Chipchase of Vex Performance - Calgary, AB
This is a POORFORM member car -- POORFORM FACEBOOK PAGE
What I bought it with:
- OEM Black Interior+Exterior (Grey top-dash was used as black got f***ed up)
- Twin Recaro Reclinable seats
- New OEM Headlights
- Kouki Tail Lights
- Apexi Dual Exhaust
- Garret GT35R
- Tial BOV
- Tial Wastegate (No screamer pipe yet)
- HKS Manifold
- V-Band Downpipe
- HKB Steering Hub
- MOMO "RACE" Wheel
- GReddy E-Manage (Removed)
- GReddy E-01 Interface (Removed)
- GReddy A/F Analog Gauge (Removed)
- HKS Coilovers (Unknown model)
- VOLK GT-C's? (Older, not 100% sure of model)
- 25mm Front Spacer
- Pioneer Double Din - Headunit
- GReddy Intercooler
- Blitz Intake
- 6000K HID's
What I have ordered or am in the process of getting installed on the car since purchase:
- HKS F-CON VPRO 3.3 + Harness (Installed)
- HKS AFK (Installed)
- MAP Sensor (Installed)
- Jimmy & Ryan @Vex Performance rewired the ECU harness and the coilpack harness properly
First things first, some introduction pictures of the car as I bought it:
Thanks for checking in, I'll try my best to keep this updated.
Last edited by 403IS300; 06-16-12 at 08:01 AM.
#3
im happy you finally joined the club man. cannot wait to see how this turns out, i know its gonna be amazing. but good luck with how everything goes for ya, and if i can do anything lemme know!
Trending Topics
#10
#12