p.hase

2x Giant Calipers (front) , 2x Rotors (front) , Pads (installed), Brake Lines.

Genuine OEM 2005 European LS430 brake system with 10 miles on clock.

Please make offer by private mail.

Very cheap! NOT stolen!

George/Stuttgart

reamemiya

iTrader: (1)

rules say you must post price within 24 hours or this thread will be closed

newyorksc

by rule you need to post an asking price.

also, stock ls430 calipers will not bolt directly onto the sc3/sc4.. do you have brackets made?

p.hase

sorry, forgot: US$ 600.00. a steal. car is/was 10 miles old only. you will need brackets.

Junk

these can only be used on ls430. you would need the complete hub assembly. everytime you remove the caliber you must also replace the caliber mounting bolts.as per the repair manual. the hub is alum.

p.hase

@ junk: just dont try and dont buy!

aliga

iTrader: (147)

this is a very good buy, brackets will be released very soon.

Lexologist

Interested. Check your PM.

p.hase

i have a second set. also 10 miles old. also i have the rear OEM calippers with pads and rotors but those are cheaper. also i have 2x RX300 brake system setups, front and rear. also i have LS430 and RX300 engines and 70% of 4 of these cars. lights, seats, wheels, steering wheels, almost everything except metallwork. before you ask: i have NO list. cars were 5-10 miles old before disassembly.

p.hase

these are the front calipers with pads and brake lines fresh out of LS430 05/2005.

p.hase

these are the front rotors fresh out of LS430 05/2005.

SC400DAVE

Will these fit on the SC 300/400, because that is the thread you are posted in.
Thanks,
Dave

p.hase

not directly --> brackets. why here? because the SC needs an upgrade more than other modells. and if - why not the best? btw: i have a feeling that these calipers are lightweight compared to stock SC calipers. did not weigh them so far, but i will do.

SC400DAVE

Do you mean that brackets have to be fabricated, or .......????