SCoupe

Went single, some nice TT pieces and leftovers available, located in NorCal if local. Prices do not include shipping. IF PART IS NOT MARKED SOLD, IT IS STILL AVAILABLE EVEN IF THIS THREAD IS FIVE YEARS OLD! (EDIT MADE June 7, 2011), I did not throw this stuff out.

Complete oem MKIV Supra TT Polished Pipes Set, Including Heat Wrapped Rubber Connecting Pipe AND Polished eom TT Heat Shield. See pix below just before I pulled them for single (polished all visual surfaces): $200
________________________________________________________________
TTC (True Twin Conversion) Mod, Parts Professionally Welded Up, eliminating flow restrictions for a full, permanent TTC setup:
1 of 2. EGCV butterfly valve completely removed and the pita holes and gaps have been professionally welded and completely sealed. This piece is perfect, cost me $90 in labor to have this done. SOLD June 07, 2011.

2 of 2, The companion modification to the above: The TT Pipe with the IACV (Intake Air Control Valve) VSV butterfly removed, professionally welded and sealed, perfect, Reed Valve deleted. $25 plus paypal fee, free shipping to USA.

Completely eliminate butterfly valve restrctions
________________________________________________________________

Polished Greddy 1-1 Pipe from Twins to Fender of an SC300 with hole cut for HKS SSQ BOV bunge. Seen in pix: $65

Polished Custom 3” Intake Hard Pipe for Twins, will include two t-clamps and both silicone couplers, perfect with the above Greddy as well as the MAF as seen in pix: SOLD
____________________________________________________________

MKIV Supra TT Polished 17” Wheels off California car, they are about 8 on a scale to 10, not perfect but damn nice. No Curb rash. SOLD.

OEM MKIV TT Cat $50

One Titan Cam Gear, new, anodized red: SOLD

MKIV oem SMIC with complete oem pipe set, $150

Two hoses plugged off with Aluminum plugs (2) to seal off stock BOV fittings to allow for use of an aftermarket BOV: $10

This is a pix of engine bay with the polished pipes:

SCoupe

TTC (True Twin Conversion) Mod, Parts Professionally Welded Up. The top piece (orange in the picture) is sold. The lower piece is for sale. $25 plus paypal fee, free shipping.

SCoupe

Polished Greddy 1-1 Pipe $65, Drilled for HKS SSQV flange, 3cm diameter hole professionally done on a drill press, (if you have a flange, I will have it welded on for free.) Fits the oem twins perfectly, it is the first pipe from twins heading over to the oem fender hole to IC. It is damn nice looking in there and the SSQV sits right on it.

SCoupe

Titan Adjustible Cam Gear, new, the best, five stainless steel studs hold, SOLD
This is new and has never been installed.

SCoupe

One of the four oem MKIV 97-98 Polished Wheels, yes, they are all this nice, NO CURB RASH, NO DENTS, includes three of four wheel covers, of which two are crappy: SOLD (tires not included).

TeKKeMeN

Hi, im currently looking for that egcv for my usdm turbos how much. I live in miami...

abounly

iTrader: (27)

I dont know how the hell you found this thread... but

It was posted on 11-15-06, 06:43 AM. almost 5 years ago buddie

TeKKeMeN

lol dont know but i'm still looking for a EGCV for usdm twins

SCoupe

Yes, TeKKemen. I think I still have this goody in my garage after it got misplaced during a move. PM to you. Thank you for your interest and thank you for finding it using the search feature. Pretty cool how I never marked it as sold like the other stuff...

SCoupe

The EGCV for usdm twins is sold to TeKKeMen, thank you.

I still have the other piece available. (the lower one in the picture is still for sale.) TT Pipe with the IACV (Intake Air Control Valve) VSV butterfly removed, professionally welded and sealed, perfect, Reed Valve deleted.

The hole is sealed via weld, not a screw, better airflow.