Garage Sale - Injectors, NA-T ENGINE Setup, ETC.
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: NH
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Garage Sale - Injectors, NA-T ENGINE Setup, ETC.
2JZ-GE NA-T engine. Just freshened low mileage (60k, undocumented) GE motor.
The manifold has already been clocked and is installed. Drain fittings are installed on oil pan, the motor has been inspected and freshened. OEM intake manifold is included with all sensors, etc. All block mounted sensors are included EXCEPT for the oil level sensor. Full Harness and M/T ecu (OBD1) included. 9.2:1 compression ratio for the street warrior (good bottom end and top end power). I have stock injectors in it now, but check below if you want 720cc. This is a non-vvti engine.
I started building two motors. Both were going to a show, but only one has been completed, and that's all I need for the show. The turbo kit is an upgraded version of my standard XSPower turbo kit and includes: FMIC, Turbo (your choice T57/T61), Vband kit, intake pipes, oil lines kit , Wastegate, your choice of BOV, dump tube, etc. Valve covers have been polished. Take it away with a warranty on the turbo kit components for $2250. Must pick up, no shipping, sorry.
Single RC Engineering 1000cc injector. Brand new, never installed, still in bag. $85 shipped ($120 new)
Supra NA fuel pump, works fine: $25 shipped
Apex'i SAFC (silver with blue VFD graphical screen) $180 with harness.
Set of 6 720CC top feed injectors. Includes NA rail machined for use with these injectors and -AN feed for an aftermarket FPR $375 shipped
Aeromotive style FPR with gauge and fittings, $150 shipped
Set of 6 720CC Sidefeed injectors for 1J/2JZ GTE stock rail (rail not included) $375 shipped. These are drop ins mechancially for the 1J/2J but will require a resistor pack for 1J. 2J does not require the resistor pack.
D2 coilover springs, stock rates for D2 coilovers. Used one week, like new. $50 shipped. ($200 new)
4 bolt flange 38mm wastegate, new, includes dump tube, gaskets, etc. $50 shipped
Please use paypal or I can take CC direct (email me) Paypal and email: jmmx22@hotmail.com
- 9.2: 1 compression ratio via new HG
- oil return drilled and installed
- XSPower Turbo Kit
- 24x12x4" FMIC
- ARP head studs
- New RMS
- New FMS
- All rubber seals (valve covers, injector seals, etc) replaced with new
- 5 Speed OBD1 ECU
- Full Wiring Harness
- NO Accessories (water pump, AC, etc)
- New timing belt & idler pulley
- Your CHOICE - T57 Turbo or GT45 turbo
The manifold has already been clocked and is installed. Drain fittings are installed on oil pan, the motor has been inspected and freshened. OEM intake manifold is included with all sensors, etc. All block mounted sensors are included EXCEPT for the oil level sensor. Full Harness and M/T ecu (OBD1) included. 9.2:1 compression ratio for the street warrior (good bottom end and top end power). I have stock injectors in it now, but check below if you want 720cc. This is a non-vvti engine.
I started building two motors. Both were going to a show, but only one has been completed, and that's all I need for the show. The turbo kit is an upgraded version of my standard XSPower turbo kit and includes: FMIC, Turbo (your choice T57/T61), Vband kit, intake pipes, oil lines kit , Wastegate, your choice of BOV, dump tube, etc. Valve covers have been polished. Take it away with a warranty on the turbo kit components for $2250. Must pick up, no shipping, sorry.
Single RC Engineering 1000cc injector. Brand new, never installed, still in bag. $85 shipped ($120 new)
Supra NA fuel pump, works fine: $25 shipped
Apex'i SAFC (silver with blue VFD graphical screen) $180 with harness.
Set of 6 720CC top feed injectors. Includes NA rail machined for use with these injectors and -AN feed for an aftermarket FPR $375 shipped
Aeromotive style FPR with gauge and fittings, $150 shipped
Set of 6 720CC Sidefeed injectors for 1J/2JZ GTE stock rail (rail not included) $375 shipped. These are drop ins mechancially for the 1J/2J but will require a resistor pack for 1J. 2J does not require the resistor pack.
D2 coilover springs, stock rates for D2 coilovers. Used one week, like new. $50 shipped. ($200 new)
4 bolt flange 38mm wastegate, new, includes dump tube, gaskets, etc. $50 shipped
Please use paypal or I can take CC direct (email me) Paypal and email: jmmx22@hotmail.com
Last edited by 98mkiv; 06-19-07 at 11:20 AM.
#7
Rookie
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: NH
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
The price is posted at $2250, but it's been dropped, $2k picked up. It's a solid motor and comes with a lot for the price. Full turbo kit with HG installed and ARP's - all set for boost, and your choice of turbos.
Last edited by 98mkiv; 06-25-07 at 02:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
PM Supra
SC400 / 300 Classifieds
1
01-16-12 08:14 PM
PM Supra
SC400 / 300 Classifieds
3
06-23-11 09:25 PM