Canover Air Suspension
04-03-08, 05:32 PM
#31
rebuild info:
Sorry I have been lagging on this. I've been knee deep in mess over at our office. Please read the badly translated stuff.
http://translate.google.com/translat...hl=en&ie=UTF-8
Actual Nihon link. http://www.canoverair.com/applicatio...ication02.html
Minimum repair cost of 15750 yen per strut.
Mail to:
21-8 Mizuki
Dazaifu, Fukuoka Japan
Postal Code 〒818-0131
Follow that. Fill this out http://www.canoverair.com/application/pdf/02.pdf
Try to see if they can send them to you state side, if not you can have it mailed to our office in Japan and we will ocean it over to you.
PM me if you need more info.
http://translate.google.com/translat...hl=en&ie=UTF-8
Actual Nihon link. http://www.canoverair.com/applicatio...ication02.html
Minimum repair cost of 15750 yen per strut.
Mail to:
21-8 Mizuki
Dazaifu, Fukuoka Japan
Postal Code 〒818-0131
Follow that. Fill this out http://www.canoverair.com/application/pdf/02.pdf
Try to see if they can send them to you state side, if not you can have it mailed to our office in Japan and we will ocean it over to you.
PM me if you need more info.
04-06-08, 07:55 PM
#38
if anyone wants the air management along with it, ill sell everything for 1800
valve manifolds, ecu, digital controller, airline, fittings, air tank, 2 compressors, 2 oilers, 2 water filters... everything you would need (sans getting the 2 cans rebuilt)
valve manifolds, ecu, digital controller, airline, fittings, air tank, 2 compressors, 2 oilers, 2 water filters... everything you would need (sans getting the 2 cans rebuilt)
04-07-08, 05:03 AM
#39
The setup sells for $1525 + shipping on easystreet's website: http://easystreetair.com/index.asp?P...ROD&ProdID=687
I have all of that + MORE: oilers for valves ($60), water filters ($50), extra compressor ($150), etc etc
The setup was used for a couple weeks to test out my canovers, I then removed everything and went back to stock. Everything is in MINT condition and barely used.
Includes:
- Auto Pilot Digital Controller
- Digital Controller ECU
- Pezio Transducers
- Anodized Manifolds
- Air Line Cutter
- 2 VIAIR 380C 200 psi Compressors
- 4 Gallon Pancake Air Tank
- Inflation Valve and Drain ****
- Wire Harnesses
- 2 Compressor Relays
- Nickel Plated Fittings + Brass Plated Fittings
- 2 SMC Inline Air Oilers
- 2 Bottles of Craftsman Air Tool Oil
- 2 Craftsman Water Filters
- Roll of 16awg Wire
- 30ft 1/4" Airline
- 25ft Cat5 Cable
I might be forgetting some parts, but I have everything for this digital management kit + more.
I also have a 5gal 9port CHROME air tank thats BNIB. If you want the chrome tank instead of the pancake tank, please add $40.
Pics:
I have all of that + MORE: oilers for valves ($60), water filters ($50), extra compressor ($150), etc etc
The setup was used for a couple weeks to test out my canovers, I then removed everything and went back to stock. Everything is in MINT condition and barely used.
Includes:
- Auto Pilot Digital Controller
- Digital Controller ECU
- Pezio Transducers
- Anodized Manifolds
- Air Line Cutter
- 2 VIAIR 380C 200 psi Compressors
- 4 Gallon Pancake Air Tank
- Inflation Valve and Drain ****
- Wire Harnesses
- 2 Compressor Relays
- Nickel Plated Fittings + Brass Plated Fittings
- 2 SMC Inline Air Oilers
- 2 Bottles of Craftsman Air Tool Oil
- 2 Craftsman Water Filters
- Roll of 16awg Wire
- 30ft 1/4" Airline
- 25ft Cat5 Cable
I might be forgetting some parts, but I have everything for this digital management kit + more.
I also have a 5gal 9port CHROME air tank thats BNIB. If you want the chrome tank instead of the pancake tank, please add $40.
Pics:
04-07-08, 06:38 AM
#40
youll spend about another $400 or so on rebuilding the rears - totalling about $2200. for $2000 you can get a basic UAS system that has cheap electric valves, manual controller, 1 compressor, etc. AND youll have to buy new struts for the bags! this is obviously a much better deal, only thing is you have to wait for the rebuild in japan. i bought this whole system for $2300 from xotic_sc. on top of that, i bought a second compressor, more air line, a lot more fittings, oilers, water filters, etc etc the list goes on. i have invested (wasted) over $2600 on this awesome setup. $1800 is an absolute STEAL!
Last edited by Kohinoor; 04-07-08 at 06:47 AM.
oh well.
Thread
Thread Starter
Forum
Replies
Last Post
TOPENDMS
CL Vendor Products for 5LS
0
05-13-19 08:48 PM
VDMTom
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
8
03-22-13 05:53 PM
