FS Complete Supercharger kit off my 97 SC400 $3350 OBO
09-13-08, 01:01 PM
#1
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
FS Complete Supercharger kit off my 97 SC400 $3350 OBO
For sale is my Supercharger kit off my 97 SC400, Bolt on for 92 and up.
This is a complete plug and play drop in kit for your SC400/GS400 I am selling the complete turnkey supercharger kit. Supercharger is the Best M90 you can get! Way better performance than a standard M90! Ported and flowed!
This is a once in a lifetime chance to get a turnkey kit like this for your SC400 or GS400. Make no mistake there are a ton of hiddden cost to do this upgrade to your car. You get it all here, you could be running in a matter of days. Plus I paid a bunch of extra cash for polishing! As soon as it is paid for I will remove it and take step by step pictures as it comes off. Also I will lable all the bolts and there position.
100% BOLT ON!!!!
I know you all have seen the videos of this beast run but here they are again.
Sound/videos
http://www.youtube.com/watch?v=zyw6E38tS5M
http://www.youtube.com/watch?v=WI5eTeExgbY
http://www.youtube.com/watch?v=pVOM5zIROFg
http://www.youtube.com/watch?v=7RwDlMHpR8A
Supercharger has about 4000 miles
Manifold & top plate (machined for Eaton M90-F) Polished!
Rear intake to suit M90 by Magnum Powers Polished!
pulley (6lb boost) Polished!
pulley (10lbs boost) Polished!
Vacuum By-pass
Belt Idler & spacer's
Mounting hardware
Drive belt to fit custom pulleys
Custom made idler pulleys w/hardware and spacers. Polished!
Custom made throttle bracket
Custom made aluminum air intake tube Polished!
Custom powder coated and polished supercharger case
Custom modifided distributer cap cover for pulley mounting
Radiator hose re-shaping tube for belt clearance
This in NOT a regular M90! It is a Magnum powers unit that has a new retail of $1200 plus a $350 core. Here are some facts on the supercharger
The Magnaport 2 is an Eaton M90 that has been reworked by
Magnum Powers. The basically took an oval port M90 then milled of the back plate, add on the Magnaport 2 plate
and a belly plate (to help achieve a tighter rotor to case clearance on the
floor of the case) and then port the exit (it is larger and has also been
beveled).
Here are some pics of the port differences between the MP2 and an oval port
This is a high performance M90 not a stock one. Magnum Powers is the best
and only company that offers the ultimate M90's. When these blowers were new the retail price for them was $1200 plus a $350 core charge for your old blower. This blower outperforms all Thunderbird SC style M90's even the Magnuson S-Port (which is offered by many companies).
Here are some pictures of it installed
$3350 plus shipping OBO Or I Fleabay it!
Selling cheap becuase my previous buyer backed out.
This is a complete plug and play drop in kit for your SC400/GS400 I am selling the complete turnkey supercharger kit. Supercharger is the Best M90 you can get! Way better performance than a standard M90! Ported and flowed!
This is a once in a lifetime chance to get a turnkey kit like this for your SC400 or GS400. Make no mistake there are a ton of hiddden cost to do this upgrade to your car. You get it all here, you could be running in a matter of days. Plus I paid a bunch of extra cash for polishing! As soon as it is paid for I will remove it and take step by step pictures as it comes off. Also I will lable all the bolts and there position.
100% BOLT ON!!!!
I know you all have seen the videos of this beast run but here they are again.
Sound/videos
http://www.youtube.com/watch?v=zyw6E38tS5M
http://www.youtube.com/watch?v=WI5eTeExgbY
http://www.youtube.com/watch?v=pVOM5zIROFg
http://www.youtube.com/watch?v=7RwDlMHpR8A
Supercharger has about 4000 miles
Manifold & top plate (machined for Eaton M90-F) Polished!
Rear intake to suit M90 by Magnum Powers Polished!
pulley (6lb boost) Polished!
pulley (10lbs boost) Polished!
Vacuum By-pass
Belt Idler & spacer's
Mounting hardware
Drive belt to fit custom pulleys
Custom made idler pulleys w/hardware and spacers. Polished!
Custom made throttle bracket
Custom made aluminum air intake tube Polished!
Custom powder coated and polished supercharger case
Custom modifided distributer cap cover for pulley mounting
Radiator hose re-shaping tube for belt clearance
This in NOT a regular M90! It is a Magnum powers unit that has a new retail of $1200 plus a $350 core. Here are some facts on the supercharger
The Magnaport 2 is an Eaton M90 that has been reworked by
Magnum Powers. The basically took an oval port M90 then milled of the back plate, add on the Magnaport 2 plate
and a belly plate (to help achieve a tighter rotor to case clearance on the
floor of the case) and then port the exit (it is larger and has also been
beveled).
Here are some pics of the port differences between the MP2 and an oval port
This is a high performance M90 not a stock one. Magnum Powers is the best
and only company that offers the ultimate M90's. When these blowers were new the retail price for them was $1200 plus a $350 core charge for your old blower. This blower outperforms all Thunderbird SC style M90's even the Magnuson S-Port (which is offered by many companies).
Here are some pictures of it installed
$3350 plus shipping OBO Or I Fleabay it!
Selling cheap becuase my previous buyer backed out.
Last edited by ScottURnot; 09-15-08 at 02:22 PM.
09-16-08, 01:01 PM
#6
Hacked CL to become a Mod
Thread
Thread Starter
Forum
Replies
Last Post
