Adaptronics stand alone ECU with 10lb & 15lb maps for SC400
10-14-08, 07:48 AM
#1
Lexus Test Driver
Thread Starter
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Adaptronics stand alone ECU with 10lb & 15lb maps for SC400
100% Plug and play!
I have a brand new turn key Adaptronics stand alone ECU. I purchased an Adaptronics stand alone ECU and then I bought a supra jumper lead. I posted the jumper harness to Neil Griffiths in Australia. Next I paid him to wire it up as a turn key plug and play unit. Neil is running this exact stand alone on two different 1UZ cars running 15lbs boost with great success. He wired it up and ran it on his car for me to verify it was plug and play. Even had it dyno tuned at 10lbs boost and 15lbs. It comes with both Maps! It is going to practically run right out of the box. I no more than got this all done and then changed my plans yet again.
This is someone’s lucky day. If you plan on boosting a SC400 this is a great chance to get into a plug and play stand alone at a great price. Not to mention you wont have to wait months to get a unit made up and shipped.
This is the closest thing to a run out of the box setup you will ever find. You will need to upgrade to larger injectors (it was tuned on 390cc) and add boost. It will include both a 10lb and a 15lb map.
I will let it go for $1400 shipped Nope Now $1300 shipped!
If it wont sell I may go ahead and use it, I am just thinking about something a little more exotic for engine management on my project.
I have a brand new turn key Adaptronics stand alone ECU. I purchased an Adaptronics stand alone ECU and then I bought a supra jumper lead. I posted the jumper harness to Neil Griffiths in Australia. Next I paid him to wire it up as a turn key plug and play unit. Neil is running this exact stand alone on two different 1UZ cars running 15lbs boost with great success. He wired it up and ran it on his car for me to verify it was plug and play. Even had it dyno tuned at 10lbs boost and 15lbs. It comes with both Maps! It is going to practically run right out of the box. I no more than got this all done and then changed my plans yet again.
This is someone’s lucky day. If you plan on boosting a SC400 this is a great chance to get into a plug and play stand alone at a great price. Not to mention you wont have to wait months to get a unit made up and shipped.
This is the closest thing to a run out of the box setup you will ever find. You will need to upgrade to larger injectors (it was tuned on 390cc) and add boost. It will include both a 10lb and a 15lb map.
I will let it go for $1400 shipped Nope Now $1300 shipped!
If it wont sell I may go ahead and use it, I am just thinking about something a little more exotic for engine management on my project.
Last edited by ScottURnot; 10-17-08 at 03:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ScottURnot
SC400 / 300 Classifieds
19
03-17-10 03:33 PM
ScottURnot
SC400 / 300 Classifieds
3
12-24-09 05:26 PM
