nghty89

I am currently doing a 2jzge N/A-T swap for my 89 supra and need the entire throttle body w/ on-board electronics BUT NO TRACTION CONTROL MODULE. I also need a starter as well, but don't remember which year will PNP with the ma70 harness. I will post that info soon.

The throttle body and starter from a 93-96 should do fine, considering the motor is from a 96 sc300 auto. The flywheel is the same used on the 2jz/1jz (don't remember teeth count at the moment). I already have the intake manifold setup, but it has a traction control piece built into the TB and I am missing sensors to fill those holes not to mention it is useless on my car and it would just make routing the charge piping difficult with the T70 top mount I am using.

Thanks!

booja

iTrader: (1)

you got a pm

romeo291

iTrader: (1)

man, I am doing my 1jz-gte swap this weekend. I should have those parts for you. How close are you to Raleigh, NC??

dohc3ltt

iTrader: (3)

I've got one a throttle body from a GE motor. I'm asking $45 shipped.
PM me if interested

nghty89

Hmm, if you have pictures please send them to nghty89@yahoo.com! I appreciate the help guys, I am so close to completing this swap. I know that the TB has to have the sensors + harness side clips attached so I can splice the tps, but I believe that is the only sensor. As for the starter... I assume I can just use the proper gauge wire and connect it up... I am going to try fitting my 7mgte starter to see if I can use that tonight.

EDIT: I am in Va Beach, not too far from Raleigh. A 1jz swap, eh? Into a..?