Ton of parts, aftermarket and stock, will be updated regularly
11-27-08, 02:13 PM
#1
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
Ton of parts, aftermarket and stock, will be updated regularly
hey all,
I'm cleaning out my garage and getting rid of my spare parts, and misc parts I never wound up using
Lexus LS400 MAF AFM, (Mass Air Flow meter/Air Fuel Meter)
no bent fins/honeycomb
I don't need this anymore since I've upgraded to a AEM stand alone
Part number: 22204-42011
I've added pics showing the MAF measures up to the factory specs (2-3k ohms at 68F) I measured it at 70F and it's showing 2.41k ohms
$85 shipped - lower 48 states (paypal included)
I'm cleaning out my garage and getting rid of my spare parts, and misc parts I never wound up using
Lexus LS400 MAF AFM, (Mass Air Flow meter/Air Fuel Meter)
no bent fins/honeycomb
I don't need this anymore since I've upgraded to a AEM stand alone
Part number: 22204-42011
I've added pics showing the MAF measures up to the factory specs (2-3k ohms at 68F) I measured it at 70F and it's showing 2.41k ohms
$85 shipped - lower 48 states (paypal included)
Last edited by dumdumgreg; 11-27-08 at 03:49 PM.
11-27-08, 02:15 PM
#2
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
Lexus SC300/Supra factory 2jz-ge ODB1/ODBI ECU
this is from a car with the factory 5 speed manual transmission
I don't need this anymore since I've upgraded to a AEM stand alone computer
I had this on my turbo SC300, and it worked fine in conjunction with my 440cc injectors and AFC2
$100 shipped (paypal included)
this is from a car with the factory 5 speed manual transmission
I don't need this anymore since I've upgraded to a AEM stand alone computer
I had this on my turbo SC300, and it worked fine in conjunction with my 440cc injectors and AFC2
$100 shipped (paypal included)
11-27-08, 02:39 PM
#4
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
3.5 bar map sensor
New AEM 3.5 bar sensor (also works with the Zeitronix datalogger)
is fitted with a 1/8 barb
new never used,
it's a spare I never used, (I spliced the signal from my Zeitronix into the AEM, so I have the AEM map sensor left over)
all you need is the pigtail. You can get it at any autozone, nappa, pepboys, it uses the same pigtail as a GM AC compressor and tps sensor. I have to look for the part number, don't have it handy at the moment.
$100 shipped (includes paypal)
is fitted with a 1/8 barb
new never used,
it's a spare I never used, (I spliced the signal from my Zeitronix into the AEM, so I have the AEM map sensor left over)
all you need is the pigtail. You can get it at any autozone, nappa, pepboys, it uses the same pigtail as a GM AC compressor and tps sensor. I have to look for the part number, don't have it handy at the moment.
$100 shipped (includes paypal)
Last edited by dumdumgreg; 02-24-09 at 11:12 PM.
11-27-08, 02:41 PM
#5
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
W58 trans
I got a spare 5 speed trans W58 with 80k miles
$400 pickedup OBO
I'll throw in a 5 puck clutch with 5k miles, if you want it (I stopped using it cause of the sqeeking sound) I went back to a full face clutch
$400 pickedup OBO
I'll throw in a 5 puck clutch with 5k miles, if you want it (I stopped using it cause of the sqeeking sound) I went back to a full face clutch
11-27-08, 02:44 PM
#6
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
stock misc parts
one 97+ foglight Drivers side (one of the tabs was broken and repaired; thats the way I got it)
I originally had a driver's side and just need a passenger side, But was not able to find one
see old post -> https://www.clublexus.com/forums/sho...d.php?t=292349
then I just gave up and bought the a set of two from "xcelr8" cause it was gay driving around with just one foglight installed
from this post -> https://www.clublexus.com/forums/show...ght=fog+lights
who had bought them from Gazi
75$ shipped
I have a stock factory amp for the subwoofer (from a 94 sc300)
it's not the nakimichi one.
$20 shipped
2jz-ge stock coil
$20 shipped
2jz-ge stock fuel rail $40
2jz-ge stock 330 injectors $90
I originally had a driver's side and just need a passenger side, But was not able to find one
see old post -> https://www.clublexus.com/forums/sho...d.php?t=292349
then I just gave up and bought the a set of two from "xcelr8" cause it was gay driving around with just one foglight installed
from this post -> https://www.clublexus.com/forums/show...ght=fog+lights
who had bought them from Gazi
75$ shipped
I have a stock factory amp for the subwoofer (from a 94 sc300)
it's not the nakimichi one.
$20 shipped
2jz-ge stock coil
$20 shipped
2jz-ge stock fuel rail $40
2jz-ge stock 330 injectors $90
Last edited by dumdumgreg; 11-27-08 at 03:35 PM.
11-27-08, 02:46 PM
#7
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
parts still on car, but removing soon
Apexi AFC2 - Black Limited Edition $200
Turbonetics Evolution wastegate $150 (I'll throw in a manual boost controller)
Apexi AFC2 - Black Limited Edition $200
Turbonetics Evolution wastegate $150 (I'll throw in a manual boost controller)
Trending Topics
11-27-08, 03:32 PM
#8
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
new Autometer fuel pressure gauge with sensor (not the mechanical one)
$85 shipped
new Autometer water temp gauge (box is a bit rought from being in my tool box) with sensor +
new aluminum radiator hose adapter for above water temp sensor, lets you install the sensor inline of the radiator hose, just cut 1" form the middle of the hose and couple the ends to the aluminum adapter
$50
Aluminum catch can (they were custom made)
I was gonna polish this one but never got around to it.
(the other one that was in my friends car looks pretty good when it was polished)
$35 shipped
Aluminum air filter to MAF adapter (heavy duty unit, thick guage aluminum)
this uses a 3.5" airfilter, 3" won't fit it
$25
factory hood scoop from a turbo 300zx (the inside edge is a bit rough, but a 10 min bond job will fix it)
$55 shipped
$85 shipped
new Autometer water temp gauge (box is a bit rought from being in my tool box) with sensor +
new aluminum radiator hose adapter for above water temp sensor, lets you install the sensor inline of the radiator hose, just cut 1" form the middle of the hose and couple the ends to the aluminum adapter
$50
Aluminum catch can (they were custom made)
I was gonna polish this one but never got around to it.
(the other one that was in my friends car looks pretty good when it was polished)
$35 shipped
Aluminum air filter to MAF adapter (heavy duty unit, thick guage aluminum)
this uses a 3.5" airfilter, 3" won't fit it
$25
factory hood scoop from a turbo 300zx (the inside edge is a bit rough, but a 10 min bond job will fix it)
$55 shipped
Last edited by dumdumgreg; 11-27-08 at 03:48 PM.
12-02-08, 07:32 PM
#10
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
Snow Performance methanol controller
new never used
it will control your pump speed based on boost pressure
so it's not just on/off like many methanol injection kits, which is bad cause it's on full blast regardless of amount of boost
(paid $125) $85 shipped
new never used
it will control your pump speed based on boost pressure
so it's not just on/off like many methanol injection kits, which is bad cause it's on full blast regardless of amount of boost
(paid $125) $85 shipped
01-16-09, 02:30 PM
#15
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
face color is set on the Ultralite model, can't be swapped
new ones on fleabay will still run you $125-150
used ones go for $70