DasBach

iTrader: (7)

Like the title states, I need to find the hard rubber line (return line I think) that goes from the tank to the pump on a 1992 SC400.

I busted mine on accident jacking my engine up to install my headers. If anyone has this, I'd greatly appreciate it!

IS_250

iTrader: (2)

Das,

you should be able to use regular PS hose from any auto parts store to make the hose from the tank. The high-pressure one with the banjo fitting is the one you'll have to use an OEM part.

DasBach

iTrader: (7)

I'll see what I can find. It was a hard, rubber line that was not flexible at all so I thought it may be a high pressure line. Just wanted to make sure. Its the thicker of the two.

Neucorp

iTrader: (1)

DashBach - it is not high pressure. Just a feeder line from the canister to the pump. Go to the auto parts store for sure. I found one bent just like I needed and just used a hack saw to cut off the excess. I think I paid less than $15.

Your current one is hard cuz it's old. Just don't put any kinks in the new and you'll be fine.

DasBach

iTrader: (7)

Thanks for the advice. I made my own, but ordered a thicker hose to actually get it to work properly..

People would laugh if they saw how I had it set up.